E-Test

A Forum For Ontario MX-3 Club Related Topics.
Post Reply
RTT
Regular Member
Posts: 198
Joined: April 30th, 2003, 2:01 am
Location: Oakville
Contact:

E-Test

Post by RTT »

i am wondering if there are any etest places around oakville that can take lowered cars....time is factor i need to get my car fixed and e tested asap before the plates run out...
User avatar
JWMX3
Senior Member
Posts: 2060
Joined: March 23rd, 2004, 2:01 am
Location: Grassie, Ontario
Contact:

Post by JWMX3 »

i got mine done at the mazda dealer, lowered 2inches on the front and it was ok

edit- that was with an ms bumper, yours is even lower.... how much clearance do you have in the front ? i think i have 4 inches
Image
94' Mx3 GS 0-60 in 7.53s [5 spd conversion / Rebuilt 2.5 KL]
User avatar
jschrauwen
Forum Moderator
Posts: 6052
Joined: September 27th, 2003, 2:01 am
Location: Frankford, Ontario, Canada
Contact:

Post by jschrauwen »

Local e-test place here didn't even want to chance it with mine a few months ago and did the non-roller (stationary) test because they didn't want to assume responsability for possible damage.
'92 GS-ZE - sold, '95 GS - sold, '02 Protege LX - Daughter, '00 Audi A4 2.8 QTip, Ducati TT2
Image
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
ExperimentX
Regular Member
Posts: 95
Joined: April 20th, 2005, 1:46 am
Location: Mississauga, Ontario

Post by ExperimentX »

Can also try the Carstar on Wyecroft, its right in front of my dealership, and I've seen them do a slammed down Eclipse in the summer.
RTT
Regular Member
Posts: 198
Joined: April 30th, 2003, 2:01 am
Location: Oakville
Contact:

Post by RTT »

ok thanks all.....the front is about 5 inches i think from the ground.....ummm actually its even lower now cuz i have smaller winter tires on... ill call around to those places then tnks
Post Reply

Return to “Ontario MX-3 Club”