Page 1 of 1
Boost kicks in @.....
Posted: May 23rd, 2005, 2:17 pm
by DavidOS
Ok need to know from the experienced boosters of v6s
i currently am running the ze
the t3/04e what rpm range would boost kick in approximatly?
and the t3(same question)
im guessing around 2700rpm for the t3 and closer to 3500 for the t3/04
are my estimates correct?
Posted: May 23rd, 2005, 7:41 pm
by babyblueMX3
right now full boost at 3.5k @ 5psi w/out filter VAF between turbo and intake
running t3-t04e 57 trim
0.83 a/r on the hot side and 0.50 on the cold side
when the boost kicks in damn it pulls hard
Posted: May 29th, 2005, 2:57 am
by Juans_93_MX3
Just curious David, but have you changed your internals on your KLZE to handle a turbo?
Posted: May 31st, 2005, 11:02 am
by Nomad_69er
Does anyone have any idea when boost kicks in with a VJ14? I'm setting up my B6 Turbo project and I'm just curious at what to expect! Thanks guys!
Posted: May 31st, 2005, 11:49 am
by facko
i have a vj-11 and it kits in around 3000-3500, but my IC piping is a lil ghetto so it migh ttake away from that
Posted: June 9th, 2005, 9:38 am
by TEAMpK
Mine kicks in at ike 3-3500. I have the VJ14, only running 10psi w/FMIC. BOOST IS GOOOOD.