Current Pics, Paint Progress Pics :D
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Current Pics, Paint Progress Pics :D
Here's a few pics of the car..the performance parts will be installed next week, the bodykit and paint job are planned for early June
Some current Mx-3 pics:
http://www.nd4spdse.net/nfsse1.JPG
http://www.nd4spdse.net/nfsse2.JPG
http://www.nd4spdse.net/nfsse3.JPG
My Koni Struts:
http://www.nd4spdse.net/nfsse4.JPG
Brembo Rotors & PBR ULX Pads
http://www.nd4spdse.net/nfsse5.JPG
B&G Springs and Camber Bolts
http://www.nd4spdse.net/nfsse6.JPG
Gas Tank, SRD Bushings and Walbro Fuel Pump
http://www.nd4spdse.net/nfsse7.JPG
OBX 1st Gen Header (To Be Modified To Fit)
http://www.nd4spdse.net/nfsse8.JPG
And my bodykit parts, waiting on CF Inverted Hood and Miata mudguards
MazdaSpeed Fibreglass Front Bumper
http://www.nd4spdse.net/nfsse9.JPG
JDM OEM Side Skirts
http://www.nd4spdse.net/nfsse10.JPG
Supra-Style Rear Wing
http://www.nd4spdse.net/nfsse11.JPG
Some current Mx-3 pics:
http://www.nd4spdse.net/nfsse1.JPG
http://www.nd4spdse.net/nfsse2.JPG
http://www.nd4spdse.net/nfsse3.JPG
My Koni Struts:
http://www.nd4spdse.net/nfsse4.JPG
Brembo Rotors & PBR ULX Pads
http://www.nd4spdse.net/nfsse5.JPG
B&G Springs and Camber Bolts
http://www.nd4spdse.net/nfsse6.JPG
Gas Tank, SRD Bushings and Walbro Fuel Pump
http://www.nd4spdse.net/nfsse7.JPG
OBX 1st Gen Header (To Be Modified To Fit)
http://www.nd4spdse.net/nfsse8.JPG
And my bodykit parts, waiting on CF Inverted Hood and Miata mudguards
MazdaSpeed Fibreglass Front Bumper
http://www.nd4spdse.net/nfsse9.JPG
JDM OEM Side Skirts
http://www.nd4spdse.net/nfsse10.JPG
Supra-Style Rear Wing
http://www.nd4spdse.net/nfsse11.JPG
Last edited by Nd4SpdSe on August 3rd, 2005, 12:40 pm, edited 5 times in total.
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
- relisys_3200
- Regular Member
- Posts: 875
- Joined: November 11th, 2004, 2:01 am
- Location: London / Ontario / Canada
- Contact:
- GregoryChristian
- Supporting Member
- Posts: 1413
- Joined: March 4th, 2003, 2:01 am
- Location: Gulf Coast
should look good ...you gonna keep the same color or change it ?
** My MX-3 ** http://www.cardomain.com/ride/360367
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
I may get the paint tilted more towards blue, but I'm definitely adding blue perls to it.
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
- fry_81
- Regular Member
- Posts: 1898
- Joined: April 22nd, 2004, 2:01 am
- Location: Barrie, Ontario, Canada
- Contact:
that will look awsome once shes painted
1994 5spd GS Parts Car For Sale 800obo. e-mail for details. fry_81@hotmail.com
- mitmaks
- Senior Member
- Posts: 8704
- Joined: September 10th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Spokane, WA
- Contact:
looking good
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
http://www.cardomain.com/id/mitmaks
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
I got one from Pakfeifer Tuning (EZ_4_FUN / Oscar). Quick and easy to deal with...I got my wing and CF hood from them too.
Last edited by Nd4SpdSe on May 7th, 2005, 3:41 pm, edited 1 time in total.
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
-
- Supporting Member
- Posts: 297
- Joined: July 22nd, 2004, 2:01 am
- Location: Minneapolis, MN. USA
- Contact:
- Bling Bling
- Regular Member
- Posts: 1013
- Joined: January 5th, 2005, 10:27 pm
- Location: Airdrie, Alberta, Canada
Current Pics, and Soon-To-Be Upgrades
I'm looking at getting the same spoiler for my car. How well did it fit? And how do you install it? And finally, does it look as if it requires alot of prep work before paint?
Stacy Whitrick
MX-West Calgary
http://www.cardomain.com/ride/1335558 UPDATED June 6,07
94 GS, Green Envy Pearl QUESTION: Does my car fit the RICE category?
MX-West Calgary
http://www.cardomain.com/ride/1335558 UPDATED June 6,07
94 GS, Green Envy Pearl QUESTION: Does my car fit the RICE category?
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Actually it's not mounted, It's just holding on there with a bungie cord. For what I can tell, it need no pref work.
Also, when I go back home next week I'll post pics of the new monitor and new (final revision) mount for it, I installed it too late last night to take pics.
Also, when I go back home next week I'll post pics of the new monitor and new (final revision) mount for it, I installed it too late last night to take pics.
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Sometime in June, prolly mid-June after I get everything sorted out, but there's 2 places I'm deciding on.
One of my cousin (who's a mechanic at Dave Chev/Olds's in Welland) has a friend who owns a bodyshop near Dunnville and does a very nice job, which is convinient cause it's close to home as well, cause I'll need someone to drive me back. (I'm home Wed/Thur/Fri, so I can easilly organise something with parents/friends to take me back home after i drop off the car, about 15min away, and take the 626 when I go back to Mississauga Friday night for work)
The other one is my old boss's ex-neighbour, who apparently does high-end work on sportcars/exotics who recently moved back up here in Mississauga. My boss likes to exagerate, so I'm skeptical about it and want to check it out for myself first, but even then, cause it's so far away from home, and I need to have a car to get to work, so I need to have a 3 car convoy, I need to drive my car to the shop, I need someone else to drive up in the 626 from Port Colborne to Mississauga for me since I'll need it while my car is in the shop, and i need a 3rd person to drive up to drive back the driver of the 626. And it's an hour and a half drive easy way, not a convinient way of doing things, but if it's worth it, ill do it.
One of my cousin (who's a mechanic at Dave Chev/Olds's in Welland) has a friend who owns a bodyshop near Dunnville and does a very nice job, which is convinient cause it's close to home as well, cause I'll need someone to drive me back. (I'm home Wed/Thur/Fri, so I can easilly organise something with parents/friends to take me back home after i drop off the car, about 15min away, and take the 626 when I go back to Mississauga Friday night for work)
The other one is my old boss's ex-neighbour, who apparently does high-end work on sportcars/exotics who recently moved back up here in Mississauga. My boss likes to exagerate, so I'm skeptical about it and want to check it out for myself first, but even then, cause it's so far away from home, and I need to have a car to get to work, so I need to have a 3 car convoy, I need to drive my car to the shop, I need someone else to drive up in the 626 from Port Colborne to Mississauga for me since I'll need it while my car is in the shop, and i need a 3rd person to drive up to drive back the driver of the 626. And it's an hour and a half drive easy way, not a convinient way of doing things, but if it's worth it, ill do it.
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Here's a few more pics of the stuff I was able to do before I brought her into the shop
My new, final design, of my LCD monitor stand with new monitor; more leg room, more clearance, better monitor, cleaner look
and a quick fitament of the bezel for my dash mounted DVD/CDRW drive.
My new, final design, of my LCD monitor stand with new monitor; more leg room, more clearance, better monitor, cleaner look
and a quick fitament of the bezel for my dash mounted DVD/CDRW drive.
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project