Page 1 of 1
probe gt parts
Posted: April 30th, 2005, 5:02 pm
by aggressivemx
what parts could i take of of a probe gt that would bolt on my mx easily for some extra power. also if i took a probe gt ecu and switched it for mine would i gain anything or be worse off, thanks
Posted: April 30th, 2005, 5:08 pm
by fry_81
given that your car is a v6, you can use the powertrain from the probe gt. that will give you more power.
Posted: April 30th, 2005, 5:10 pm
by aggressivemx
like what, im kinda looking for some easy things cause im moving in three weeks and i just wanna find some more power before i go
Posted: April 30th, 2005, 5:16 pm
by fry_81
like the engine itself, if you got access to an engine hoist its pretty straight forward as im told. uses the same mounts and will bolt up to the tranny no problem.
Posted: April 30th, 2005, 6:14 pm
by aggressivemx
i was going to swap, but i dont have time now before i move
Posted: April 30th, 2005, 6:51 pm
by lakersfan1
Put the KL01 intake cams in. The K8 intake cams have a lame lift on them compared to the KL01 cams. The K8 exhaust cams are OK, though.
Posted: April 30th, 2005, 11:57 pm
by aggressivemx
how hard is it to switch cams, do i need to change anything else