probe gt parts

aggressivemx · Post by **aggressivemx** » April 30th, 2005, 5:02 pm

what parts could i take of of a probe gt that would bolt on my mx easily for some extra power. also if i took a probe gt ecu and switched it for mine would i gain anything or be worse off, thanks

fry_81 · Post by **fry_81** » April 30th, 2005, 5:08 pm

given that your car is a v6, you can use the powertrain from the probe gt. that will give you more power.

aggressivemx · Post by **aggressivemx** » April 30th, 2005, 5:10 pm

like what, im kinda looking for some easy things cause im moving in three weeks and i just wanna find some more power before i go

fry_81 · Post by **fry_81** » April 30th, 2005, 5:16 pm

like the engine itself, if you got access to an engine hoist its pretty straight forward as im told. uses the same mounts and will bolt up to the tranny no problem.

aggressivemx · Post by **aggressivemx** » April 30th, 2005, 6:14 pm

i was going to swap, but i dont have time now before i move

lakersfan1 · Post by **lakersfan1** » April 30th, 2005, 6:51 pm

Put the KL01 intake cams in. The K8 intake cams have a lame lift on them compared to the KL01 cams. The K8 exhaust cams are OK, though.

aggressivemx · Post by **aggressivemx** » April 30th, 2005, 11:57 pm

how hard is it to switch cams, do i need to change anything else