Let's hear your mod plans for spring/summer '05

General Mazda MX-3 Discussions
User avatar
MarkMoore
Regular Member
Posts: 798
Joined: June 25th, 2004, 2:01 am
Location: New Jersey, USA

Let's hear your mod plans for spring/summer '05

Post by MarkMoore »

well, school's lettin' out first week of may, and i'll have gobs of time on my hands to work w/ my car (finally!)... i've been saving up a ton of money so i'm excited... here's my list of mods, all of which are definitely feasible because i already have in my bedroom most of these parts.....


stereo/alarm/etc.:

-pioneer head unit
-4 6.5" pioneer for all 4 corners
-820W power acoustik amp
-to 10" kenwood subs
-kenwood tweeters
-i'm goin to completely soundproof my car (i'll make an in-depth, exhaustive write-up w/ pics and my reaction for anyone's who's interested)
-alarm system
-keyless remote
-power door locks
-remote trunk opener
-remote start-up

interior:

-indiglo HVAC panel
-completely redone interior (headliner, seats, door panels, etc.)

exterior:

-maybe rims/tires (using OEM currently)
-MS front and possibly the sides
-Erebuni rear
-maybe paintjob, but probably not until after summer sometime
-5% hatch tint
-possibly a custom spoiler, although i have the GS one in my room currently if i wanna use it
-possibly custom sideview mirror swap w/ a Grand Am or Grand Prix
-custom headlight mod
-custom turn signal mod, if it doesn't pan out, then the clear will have to do

performance:

-headers, not sure which ones yet
-other little stuff, spark plugs/wires etc. etc.
-somewhere around a 2" drop, but haven't decided on what brands yet, but that will be done in a month or so
-possibly the whiteline rear sway bar
-rear strut tower bar to match my front one already in
-possibly custom exhaust, however i need to learn how to weld, lol... so i might take a class in september, or maybe i'll just 'wing it', and buy a welder off my friend's friend and give it the ole' college try
-ZE and MTX looks like it'll be spring '06 woohoo!



-probably other stuff which i can't think of right now
-and a butt-load of other custom stuff which i'll attempt-but i don't wanna say too much lest i give it away, or worse i fail and look like a shmuck for opening my big yap and not following through w/ it...

if i think of anything else i'll post, but that's a pretty good list for now anyways...
Last edited by MarkMoore on April 22nd, 2005, 7:19 am, edited 1 time in total.
1992 GS/RS Mutant Automatic
Gro Harlem
Senior Member
Posts: 3391
Joined: November 30th, 2001, 2:01 am
Location: Stuttgart, Deutschland
Contact:

Post by Gro Harlem »

interior:
-redo new headliner w/black fabric
-black leather seat install! (Yay)
-try to fix up one of the 3 broken cargo covers I have & replace the one I have
-leather shift, e-brake & console lid covers

Exterior:
-finish painting rest of car (door jambs & backside of doors, underside of hood & underside of hatchlid)
-eyelids
-oem skirts
-wrap-around spoiler (either new drag wing or canadian-spec one)
-sand paint down smooth & buff up

Suspension/Brakes
-New master cylinder
-rebuild rear calipers
-new front & rear rotors
-new front & rear pads (semi-metallics)
-rear stb install in trunk
-new falken azenis installed on my 16" rotas

Engine/Drivetrain:
-finish bulletproofing transmission w/lsd
-dual-feed fuel setup w/AFPR
-dyno tuning
-possibly remove a/c (if i can't get it workign soon)
Noble Green Metallic 93' GS Hybrid, 91' 1.8 323
DONATE TO MX-3.COM
User avatar
mitmaks
Senior Member
Posts: 8704
Joined: September 10th, 2001, 2:01 am
antispam: ~SPAM*SUX~
Location: Spokane, WA
Contact:

Post by mitmaks »

need another set of hood pins,
paint job at least on front bumper
clear corner lights

most money going to Charger project
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
Image
User avatar
Tunes67
Supporting Member
Posts: 4708
Joined: January 27th, 2005, 6:36 pm
Location: Everett, WA
Contact:

Post by Tunes67 »

I have a pretty short mod list..

Custom Cargo Cover
New Rims of indeterminate nature (LOL)
Possible CAI (My stock system isnt in the best shape)
Miata door handles
Rear Mud Guards


There are other general maintenance projects scheduled as well.. such as a new water pump and a brake system check up.

Tunes67
User avatar
93SOHC
Regular Member
Posts: 1875
Joined: November 21st, 2004, 2:01 am
Location: Lake Villa IL usa

Post by 93SOHC »

Rear Muds
custom headliner(i'm workin' on sewing one in teal/gray to match seat n' stuff
Replace front seats w/ ones in better shape
New carpet( might not be in the budget)
Paint a and b pillar trim black
Gs wing(again)
Ms sides
install my new GC coilovers/Tokico struts
rear swaybar links
install my gs tiebar
Finish and install projector project
install shiney new cargo cover when I get my trunk back together, LOL
replace Battery terminals
upgrade alternator wire, install Gs alternator
piaa fog lamps(may not be in budget)
sand and repaint rims(possibly black, or keep em'GM)
Tint windows(coming real soon!)
Pager alarm
replace 4 speakers and all wiring to them
Interior and exterior LED or neons(may not be in budget)
Finally rebuild and install BP motor(a bit outta budget, but it WILL happen this summer!!!)

...Man thats a tall order for spring and summer, but its not much in the grand sceme of things,IMO. Now if I only had a day off some of it would get done,. Been working 7 day weeks to afford all this stuff, now I gotta get it and find time to put it in, LOL
93SE-KLDE Theres a big peice of metal inside my other peice of metal now...weird???
Image
User avatar
verzutiko
Supporting Member
Posts: 355
Joined: July 3rd, 2004, 2:01 am
Location: Norway

Post by verzutiko »

Interior
Seat Re-Upholstery GB

Exterior
Lowering the car
KONI


Not much, but at least realistic...
'92 GS
My worklog
User avatar
Neil
Regular Member
Posts: 961
Joined: June 30th, 2003, 2:01 am
Location: Brandon Manitoba
Contact:

Post by Neil »

Exterior:
Paint MS Bumper & install it
MS Sideskirts later this summer
MS Miata Projectors (if money left over)
Paint entire car
Install GS wrap around spoiler & remove old GS spoiler
Rota Slipstreams

Interior:
Full custom door panels
Custom cargo cover
New A-Pillars
Do something about ugly beige seats / back seats
Sparco floor mats
Install Deck / Speakers

Performance:
Install CAI thats laying around the house
Get H&R springs / Koni's
Replace brake rotars / pads
Short Shifter

I'm sure with my list, it wont be in that order and there will probally be other things that i didnt plan on doing that i do intead of something on that list... But theres a fairly accurate list of what i hope to get done.
Ever notice anyone driving slower than you is an idiot and anyone driving faster than you is a maniac?
01-03 Civic Projector Swap Tutorial
User avatar
ryanlindenberg
Regular Member
Posts: 874
Joined: February 24th, 2003, 2:01 am
Location: Minnesota

Post by ryanlindenberg »

do my BPT swap again (this time fully rebuilt)
replace almost all suspension components and drop it 1.5"
new tires
maybe some strut bars or something
custom cargo cover (possibly)

not a big list but it will make my car 10x more fun to drive.
CARDOMAIN WITH UPDATED PICS
"There are 2 kinds of pedestrians, the quick and the dead."
OptiX
Regular Member
Posts: 81
Joined: April 22nd, 2005, 9:45 am
Location: Hamilton Ontario

Post by OptiX »

for my 323/MX-3 hybrid

Stereo:
- Center chanel 4X2.5" 150watt speaker , and the Panasonic CQ-VD7700U head unit ($3200 retail :shock: )

Interior:
- not much actually, its pretty much done other than door trim customizing

Engine: The Swap

Suspention & Brakes:
- Ground Control Coil overs, kyb gr-2 struts, steel braided lines
- HP RACING big brake kit for minimum 16" rims
- conversion or rear from drum to disc brakes

Body:
- paint job peral white w/ a lil metalic flake, similar to stock 2004 acura tsx's, just a lil brighter white.
- shave off all annoying things like lock cylinders, side bump inserts, roof dips, antenna, rear wiper
- new door handles
- Mazdastyle GTR rear end from cork sport: http://www.corksport.com/content/00/01/ ... 480923.jpg
- Pakfeifer Blau front spoiler and gtx bumper http://pakfeifertuning.com/store/images ... gturbo.jpg
- and Pakfeifer Blau side skirts http://pakfeifertuning.com/store/images ... blau_4.jpg
User avatar
93-Spec-Edn
Regular Member
Posts: 817
Joined: April 1st, 2003, 2:01 am
Location: alberta, canada

Post by 93-Spec-Edn »

Well here is goes...

-new tires for stock se rims
-paint the black plastic trimming myself to factory colour
-new windshield
-do rear vcg if i get time

And maybe if i can find a car with a klde in it and i get to see the milage etc i may do the swap but i doubt i want to dump that kind of money in a 10 yr old car that runs perfect and is reliable.
92 mx-3 RS RIP | 95 mx-3 GS sold | 93 mx-3 GS SE sold | 95 mx-3 GS present
User avatar
Sam Baker
Regular Member
Posts: 1461
Joined: May 23rd, 2003, 2:01 am
Location: Wellington, New Zealand

Post by Sam Baker »

saving up for a motorcycle so that i'll end up spending less on the car. :roll: you know how it is.. but here is my list anywayz:

Roll Bar
Sway Bar
Projector Headlights
Modded Taillights
Brembo Rotors
Working Intake
Full Exhaust system (headers, cat, muffler, everything)
and different springs
92 Autozam AZ3
User avatar
ertaisi
Regular Member
Posts: 199
Joined: February 10th, 2005, 1:17 am
Location: Omaha

Post by ertaisi »

Civic Projector swap
goodbye orange ugliness, hello clear corners (Sylvania Silverstars)
tint windows
strut bars front/rear
rear tie bar
15" Motegi TrakLite 10.5 lbs.
Possibly Eibach Springs/undecided struts if time/income allows
'95 RS: RIP
User avatar
Nd4SpdSe
Senior Member
Posts: 11212
Joined: May 25th, 2002, 2:01 am
Location: Québec City, Quebec, Canada
Contact:

Post by Nd4SpdSe »

First, maintenance to the 626 before I use it while my car is in the shop:
New summer tires and 15" rims (done today)
Front Brakes and Rotors, Front Left Lower Control Arm and CV Boots (installing Friday)

And the Mx-3:
Exterior:
MS Bumper (have)
JDM OEM Side Skirts (have)
Supra-Style wing (have)
Rear 99+ Miata Mudguads (not yet)
Remove the rust and give the car a whole new paint job, same color with blue perls added.
40% Tint (sometime over the summer)
CF Invader Hood (pending on side job)
***Paint job and body kit, excluding CF hood, install is planned to start the week after returning from the Ottawa Mazda Meet - May21-22)

Performance:
Modify and install OBX 1st gen headers (have)
New 02 sensors (have)
Brembo crossdrilled/slotted rotors (have)
PBR Ceramic Pads (missing rears :()
B&G Springs (have)
KYB E-Spec Struts (backordered)
Rear-right wheel bearing
Stainless Brake/Fuel and Clutch Lines (have clutch line, but can't buy the fuel/brake lines cause they want to see the old ones first)
Gas Tank (have)
SRD bushings out the ying-yang (most in shipping, some not ordered)
"Hi-Flo" Catalytic Converter (to be made at headers install)
***All above performance items will be installed sometime in the next 2-3 weeks, waiting on arrival of KYB struts, and finish ordering bushings and find rear pads)***

Interior:
J-Spec "Passenger" door panel (after I find one that doesn't rape me on shipping)
Sparco Racing Seats (prolly end summer)
Re-carpeting rear sears and rear and door panels (pending on J-Spec door panel, prolly end summer)
Final LCD monitor mount (in progress)
Computer case/trunk cover (pending on weather and time to finish, will continue this project sometime in June)
Front bezel to dash mounted DVD/CDRW (May/June)
Paint Interior dash trim (June, while the exterior is getting painted)
Last edited by Nd4SpdSe on April 22nd, 2005, 9:12 pm, edited 2 times in total.
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
jbruynson
Regular Member
Posts: 74
Joined: February 2nd, 2005, 9:01 pm
Location: Edmonton

Post by jbruynson »

haven't had my car long but i've been collecting stereo stuff for a while and 1st thing im gonna do is install a system.

180 amp alt
2 XXX6.5 speakers, gonna have to custom fit them somehow
15" RE XXX with 1600 watts going to it, in a 4.1 cu ft ported box, which takes up pretty much whole trunk.


After this, i'm going right to a ze swap which will be done in the summer sometime. No clue if i'll get to doing other things here and there after that.
User avatar
babyblueMX3
Supporting Member
Posts: 3755
Joined: February 23rd, 2003, 2:01 am
Location: Gatineau,Quebec,Canada
Contact:

Post by babyblueMX3 »

Gro Harlem wrote: -finish bulletproofing transmission w/lsd
you and me need to have a little chat


as for me
dyno tuning and wideband install
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Post Reply

Return to “General Mazda MX-3”