Moving a turbo to the back a good idea?

A Forum For All Forced Induction Systems Topics Such As Turbos, Superchargers and Nitrous Oxide.
Post Reply
Juans_93_MX3
Senior Member
Posts: 2220
Joined: October 17th, 2004, 2:01 am
Location: SLC, Utah

Moving a turbo to the back a good idea?

Post by Juans_93_MX3 »

I am just wondering,
since there are people with Trans Ams and Camaros putting turbos on the back of their cars, wouldnt having long pipes running from the turbo to the engine cause alot of turbo lag?
2008 Mazda 3
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
User avatar
EZ_4_FUN
Supporting Member
Posts: 1026
Joined: April 2nd, 2001, 2:01 am
Location: Toronto
Contact:

Post by EZ_4_FUN »

I'm not very knowledgable here, but imo, in the case of our cars being mx-3's and at most a 2.5 V6 displacement, it would definitely cause alot of lag and not be a wise decision. Possible; of course, anything is.

In the case of trans ams and camaro's, they have 5.7l LT1 engines (corvette motors) in them. They put out tons more exhaust and therfore spool huge turbos regardless of the length of piping.

But I could be wrong, so no haters please :twisted:
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com
Ma-Ze
Regular Member
Posts: 53
Joined: July 20th, 2004, 2:01 am
Location: San Antonio, TX

Post by Ma-Ze »

its a terrible idea. no matter what size turbo or what kind of motor your using you would be losing alot of potential power.
92 MX-3 RS,
Racing Mazda turbo kit. 451 WHP @ 25 psi
12.1 @ 117 mph w/318whp
http://www.cardomain.com/memberpage/652555
User avatar
babyblueMX3
Supporting Member
Posts: 3755
Joined: February 23rd, 2003, 2:01 am
Location: Gatineau,Quebec,Canada
Contact:

Post by babyblueMX3 »

intake piping = :freak:
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Post Reply

Return to “Forced Induction”