automatic reliability

A forum for discussions regarding the MX-3' transmission. Swap, technical, and troubleshooting info should be placed here.
Post Reply
quadraphonic
Junior Member
Posts: 8
Joined: May 25th, 2002, 2:01 am
Location: Canada

automatic reliability

Post by quadraphonic »

Hey guys,
I've seen some reports on the automatic tranny in the MX-3 not being the best. Is this a bias towards manual trannies or are there significant deficiencies in the auto models? What I was looking for was a 94-96 GS. Any particular quirks within that range? Thanks for any help guys.
Q187
Regular Member
Posts: 348
Joined: July 17th, 2001, 2:01 am
Location: NC, USA

Re: automatic reliability

Post by Q187 »

Don't do it! NOO!!! I have a 92 GS Auto with 110K miles on it. Had to have entire tranny rebuilt for $1,500. Then the clutch blew twice after that. THis is in the past year.
User avatar
Andrew_Pakula
Senior Member
Posts: 2362
Joined: November 18th, 2000, 2:01 am
Location: Toronto, Ontario, Canada
Contact:

Re: automatic reliability

Post by Andrew_Pakula »

The trannys are bad, I've owned my car for over 4 years now and I've had to rebuilt the tranny a couple times.<p>I have been lucky lately though my current auto tranny has lasted just over 2 years now.
Sonicxtacy02
Senior Member
Posts: 2053
Joined: January 1st, 2001, 2:01 am
Location: Woodbridge, VA, USA
Contact:

Re: automatic reliability

Post by Sonicxtacy02 »

If you've had ur tranny repaired since 6/2000 you've got a stronger gearbox. That could be why its lasted longer. :shrug:
Shaun Newman
SOLD 1994 Blaze Red GS/ SOLD 1994 Chaste White GS-R
User avatar
Andrew_Pakula
Senior Member
Posts: 2362
Joined: November 18th, 2000, 2:01 am
Location: Toronto, Ontario, Canada
Contact:

Re: automatic reliability

Post by Andrew_Pakula »

<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by Sonicxtacy02:
If you've had ur tranny repaired since 6/2000 you've got a stronger gearbox. That could be why its lasted longer. :shrug: <hr></blockquote><p>What is the significance of 6/2000?
Sonicxtacy02
Senior Member
Posts: 2053
Joined: January 1st, 2001, 2:01 am
Location: Woodbridge, VA, USA
Contact:

Re: automatic reliability

Post by Sonicxtacy02 »

Mazda replaced the old gear box part no. with a beefed up remake that month i believe. I read it on the Probe/626/mx6/mx3 FAQ that talks about fluid types and such. Cant remember the link offhand.
Shaun Newman
SOLD 1994 Blaze Red GS/ SOLD 1994 Chaste White GS-R
LADDIE
Junior Member
Posts: 4
Joined: May 29th, 2001, 2:01 am
Location: Adelaide, South Australia
Contact:

Re: automatic reliability

Post by LADDIE »

Bahhhh!
I had mine rebuild few times since that date and it is dead again....
The mx-3 tranny was originally designed for lot smaller engine.
I blew it up more then i care to admit to.
Each rebuild is like $2,000AU with performance parts but unfortunately the clutches are too small to hold even the power of the 1.8
hate to think how long it would last under the ZE power.<p>Regards,<p>LADDIE
Silver 94 garage door stopper
LADDIE
Junior Member
Posts: 4
Joined: May 29th, 2001, 2:01 am
Location: Adelaide, South Australia
Contact:

Re: automatic reliability

Post by LADDIE »

Bahhhh!
I had mine rebuild few times since that date and it is dead again....
The mx-3 tranny was originally designed for lot smaller engine.
I blew it up more then i care to admit to.
Each rebuild is like $2,000AU with performance parts but unfortunately the clutches are too small to hold even the power of the 1.8
hate to think how long it would last under the ZE power.<p>Regards,<p>LADDIE
Silver 94 garage door stopper
Sinistral
Regular Member
Posts: 334
Joined: July 23rd, 2001, 2:01 am
Location: Montreal,Canada
Contact:

Re: automatic reliability

Post by Sinistral »

I have my car now for about 2 years 1/2.. And my auto trany is like a new one.. So I don't have any problem with it for now.. <p>But If i need to change it.. it's gonna be a mx6 one!
LADDIE
Junior Member
Posts: 4
Joined: May 29th, 2001, 2:01 am
Location: Adelaide, South Australia
Contact:

Re: automatic reliability

Post by LADDIE »

If it fits!!!
I am yet to measure one up...
I had access to the manual one but missed my chance....
But if it fits as i was led to believe it will be a mod number one for all ATX owners.<p>Waitingly,<p>LADDIE
Silver 94 gearboxless 30x
Sinistral
Regular Member
Posts: 334
Joined: July 23rd, 2001, 2:01 am
Location: Montreal,Canada
Contact:

Re: automatic reliability

Post by Sinistral »

Agreed
User avatar
Aston Wards
Regular Member
Posts: 761
Joined: December 28th, 2001, 2:01 am
Location: Christchurch, New Zealand

Re: automatic reliability

Post by Aston Wards »

I've been told it doesn't fit, i guess that's probably why they didn't use it in the first place? But of course anything is possible..., if you've got the dosh $$$$!
91 Eunos Presso KF-ZE
89 Nissan 300ZX TT 2+2
90 Nissan 300ZX TT 2+0
Image
Sinistral
Regular Member
Posts: 334
Joined: July 23rd, 2001, 2:01 am
Location: Montreal,Canada
Contact:

Re: automatic reliability

Post by Sinistral »

it fit
Coolaid776
Junior Member
Posts: 10
Joined: August 16th, 2002, 2:01 am
Location: Holmdel, NJ USA

Re: automatic reliability

Post by Coolaid776 »

Well, my tranny just died for the 3rd time in 3 years! I am sick, and tired of the problem, so I am getting rid of the car.
Edit: Fixed the tranny.. Gonna give it one last try.. cost me $1,300 US this time including a new right axle boot, and a new left axle (the needed to be done. 1,300 i guess isn't to bad.. it was the pump this time, and a rebuild. He didn't charge labor.<p>[ March 13, 2003: Message edited by: Coolaid776 ]</p>
Post Reply

Return to “Transmissions”