MX-3.com

does anyone know how to hook up the little single leds? if anyone has any good diagrams or anything, that would be great. thanks

You need a resistor in series with the LED, don't know what size but I've seen some good threads in Lighting about this. Do a search there and you should find all the info you need.

what are you using the LED for?

I have switches in my car... on both switches i wanted LED's to light up when they were active (these switches control various lights (interior and exterior), this way i could tell if my lights were off or on without having to get out of the car and look.. etc... anyways..i didn't hook up any resisters to my LED's... i just just ran my positive from the battery terminal.. to one side of the dip switch.. then ran the other side of the switch to the LED, and to the neons. then i grounded the LED and the Neons seperately. Works fine, i've repeated this tons of times on many cars... always works.. and always looks professional. Parts at RadioShack for the LED and the switch is only like $5.00

-Chris

thanks guys, but i got it all working, i already had the resistors and everything, just had a couple of ideas on how i was going to work it but finally decided

thanks again