Page 1 of 1
15.02 sec in my KL-ZE MX-3
Posted: August 17th, 2002, 12:34 pm
by curtklze
I went back to the track last night and I spent more time trying out new things.<P>My best time was a 15.043 at arount 94.13 MPH<BR>My 60 foot times were 2.272, 330foot 6.374 and the 1/8 mile was 9.748.<BR>I also cut a .582 light(my best so far)<P>I got these times buy pulling my air filter and filter lid off the box, pluging the fuel press regulator, icing down the intake manifold, doing a dry burn out, launching hard at 2500, and shifting at 6500.<P>I still had my stock 1 3/4 exhaust.<P>the track started to go away after dark and I ran out of ice so my times started to turn to s---, but I still ran a few 15.3's
Re: 15.02 sec in my KL-ZE MX-3
Posted: August 17th, 2002, 1:51 pm
by killerpickle
You could probably shave a few tenths off your times by shifting a smidge later. I dont know the exact rpms...I shift at redline (7000 rpm on my 93)....<P>either way, nice improvement didn't you get almost 16 last time?!!<P>you ever thought about building a cheap home depot intake? 50-70 bucks?
Re: 15.02 sec in my KL-ZE MX-3
Posted: August 17th, 2002, 3:30 pm
by MAZDASPEED STEVE
Curt I still got some peices of my old PRM if you want it, it's yours, you'll just need to buy some silicone fittings. I'll bring it to ST. Thomas for you IF YOU JUST GIVE ME SOME DIRECTIONS ON HOW TO GET THERE :p
Re: 15.02 sec in my KL-ZE MX-3
Posted: August 17th, 2002, 5:46 pm
by Andrew_Pakula
Here is directions to St. Thomas, it's fairly easy to get there, I've been there a couple time over the last 2 years.<P><A HREF="
http://www.stthomasdragway.com/map_to_track.html" TARGET=_blank>
http://www.stthomasdragway.com/map_to_track.html</A>
Re: 15.02 sec in my KL-ZE MX-3
Posted: August 17th, 2002, 8:09 pm
by 93mxrgs
go get a bbk or a mac intake off a 93-96 mustang.. fits greats, looks great, performs great... and its cheaper than a PRM or hot shot....
Re: 15.02 sec in my KL-ZE MX-3
Posted: August 18th, 2002, 1:01 pm
by Smokin mx-3
when ar you guys going to st thomas<BR>time and date <P>also curt if you have a kl-ze and a north american 2.5L ecu then try shifting at like 7300rpm in every gear down the 1/4
Re: 15.02 sec in my KL-ZE MX-3
Posted: August 18th, 2002, 3:24 pm
by Nd4SpdSe
ice?
Re: 15.02 sec in my KL-ZE MX-3
Posted: August 18th, 2002, 4:12 pm
by MAZDASPEED STEVE
To cool down the Intake Manifold
Re: 15.02 sec in my KL-ZE MX-3
Posted: August 19th, 2002, 11:41 am
by curtklze
If the weather is good, we are going to ST.Thomas thisfriday august 23.<P>I will show up around 7:00 P.M.<P>And Im gonna bring like 10 bags of ice
Re: 15.02 sec in my KL-ZE MX-3
Posted: August 19th, 2002, 10:54 pm
by aaronthehic
I think I raced the same night at st thomas<P> picked up comp ta drag radials 100$ cash in guelph possible more to come
Re: 15.02 sec in my KL-ZE MX-3
Posted: September 1st, 2002, 4:04 pm
by TopGun
HEy do you guys want to meet up sometime? I'm going to be in the l00 (H20L02) so that's right beside Guelph...<P>I wouldn't mind checkin' out a KLZE car... my car is mostly stock, and I've got my stock rims on right now as winter arrives soon.
Re: 15.02 sec in my KL-ZE MX-3
Posted: September 6th, 2002, 10:50 am
by 1SICKMX6
Your MPH is supporting a faster time than that I think you should shift a little higher like at least 6800rpm. Also what ecu are you using the guys with the 1.8 ecu shift lower and the guys with the 2.5 ecu shift higher. with the 2.5 ecu I was shifting at 7600rpm on the stock tach that is about 7200rpm on the auto meter. Go to toronto motorsports tonight and we can see!
Re: 15.02 sec in my KL-ZE MX-3
Posted: September 6th, 2002, 11:38 am
by Custommx3
Paul ran a 14.8 last night the Mustng cobra in the lane beside him ran a 14.4. He stopped paul and said "damn that car is f$$$$n fast". It was so crazy.