15.02 sec in my KL-ZE MX-3
-
- Regular Member
- Posts: 1749
- Joined: April 17th, 2002, 2:01 am
- Location: Okotoks, Alberta Canada
- Contact:
15.02 sec in my KL-ZE MX-3
I went back to the track last night and I spent more time trying out new things.<P>My best time was a 15.043 at arount 94.13 MPH<BR>My 60 foot times were 2.272, 330foot 6.374 and the 1/8 mile was 9.748.<BR>I also cut a .582 light(my best so far)<P>I got these times buy pulling my air filter and filter lid off the box, pluging the fuel press regulator, icing down the intake manifold, doing a dry burn out, launching hard at 2500, and shifting at 6500.<P>I still had my stock 1 3/4 exhaust.<P>the track started to go away after dark and I ran out of ice so my times started to turn to s---, but I still ran a few 15.3's
DONT SHIP WITH UPS!!! DIE UPS DIE!!!!!
Yes, I AM a bastard
Here is my web site, I made this last year but didnt feel like shareing it untill now.
http://members.rogers.com/curts-klze/
How does this guy know so much?
He's a licenced BMW technician.
Yes, I AM a bastard
Here is my web site, I made this last year but didnt feel like shareing it untill now.
http://members.rogers.com/curts-klze/
How does this guy know so much?
He's a licenced BMW technician.
-
- Regular Member
- Posts: 733
- Joined: January 16th, 2001, 2:01 am
- Location: Niagara Falls, Canada
- Contact:
Re: 15.02 sec in my KL-ZE MX-3
You could probably shave a few tenths off your times by shifting a smidge later. I dont know the exact rpms...I shift at redline (7000 rpm on my 93)....<P>either way, nice improvement didn't you get almost 16 last time?!!<P>you ever thought about building a cheap home depot intake? 50-70 bucks?
Tom Alexander
93 MX3 GSR - KLZE / stage 3 clutch / PRM Intake / 2.25" exhaust - dual 3" outlet
full custom black and red interior / KLZE ECU / JE50 VAF
http://home.cogeco.ca/~mx3/ - updated dec 1/03
93 MX3 GSR - KLZE / stage 3 clutch / PRM Intake / 2.25" exhaust - dual 3" outlet
full custom black and red interior / KLZE ECU / JE50 VAF
http://home.cogeco.ca/~mx3/ - updated dec 1/03
- MAZDASPEED STEVE
- Regular Member
- Posts: 380
- Joined: December 18th, 2000, 2:01 am
- Location: Guelph, Ontario, Canada
Re: 15.02 sec in my KL-ZE MX-3
Curt I still got some peices of my old PRM if you want it, it's yours, you'll just need to buy some silicone fittings. I'll bring it to ST. Thomas for you IF YOU JUST GIVE ME SOME DIRECTIONS ON HOW TO GET THERE :p
THANX
MAZDASPEED
STEVE
MAZDASPEED
STEVE
- Andrew_Pakula
- Senior Member
- Posts: 2362
- Joined: November 18th, 2000, 2:01 am
- Location: Toronto, Ontario, Canada
- Contact:
Re: 15.02 sec in my KL-ZE MX-3
Here is directions to St. Thomas, it's fairly easy to get there, I've been there a couple time over the last 2 years.<P><A HREF="http://www.stthomasdragway.com/map_to_track.html" TARGET=_blank>http://www.stthomasdragway.com/map_to_track.html</A>
Click here for Andrew's FIVE BUCKS Part-Out CLEARANCE!
My Former MX-3: http://www.zerokarma.com/mx-3/ - updated 10/10/2005
My New Ride: 2003 Lexus IS300 Intensa Blue Pearl, E-shift, Premium Package
My Former MX-3: http://www.zerokarma.com/mx-3/ - updated 10/10/2005
My New Ride: 2003 Lexus IS300 Intensa Blue Pearl, E-shift, Premium Package
-
- Regular Member
- Posts: 427
- Joined: September 1st, 2001, 2:01 am
- Location: machesney park, Illinois, US
Re: 15.02 sec in my KL-ZE MX-3
go get a bbk or a mac intake off a 93-96 mustang.. fits greats, looks great, performs great... and its cheaper than a PRM or hot shot....
Black-93 mx-3 Gs-R<BR>with goodies
<BR>Hondas suck, and yes i race them...<BR>oops i mean no no i dont
![Smile :)](./images/smilies/icon_smile.gif)
![Smile :)](./images/smilies/icon_smile.gif)
-
- Regular Member
- Posts: 315
- Joined: September 26th, 2001, 2:01 am
- Location: Guelph
Re: 15.02 sec in my KL-ZE MX-3
when ar you guys going to st thomas<BR>time and date <P>also curt if you have a kl-ze and a north american 2.5L ecu then try shifting at like 7300rpm in every gear down the 1/4
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Re: 15.02 sec in my KL-ZE MX-3
ice?
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
- MAZDASPEED STEVE
- Regular Member
- Posts: 380
- Joined: December 18th, 2000, 2:01 am
- Location: Guelph, Ontario, Canada
-
- Regular Member
- Posts: 1749
- Joined: April 17th, 2002, 2:01 am
- Location: Okotoks, Alberta Canada
- Contact:
Re: 15.02 sec in my KL-ZE MX-3
If the weather is good, we are going to ST.Thomas thisfriday august 23.<P>I will show up around 7:00 P.M.<P>And Im gonna bring like 10 bags of ice ![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
DONT SHIP WITH UPS!!! DIE UPS DIE!!!!!
Yes, I AM a bastard
Here is my web site, I made this last year but didnt feel like shareing it untill now.
http://members.rogers.com/curts-klze/
How does this guy know so much?
He's a licenced BMW technician.
Yes, I AM a bastard
Here is my web site, I made this last year but didnt feel like shareing it untill now.
http://members.rogers.com/curts-klze/
How does this guy know so much?
He's a licenced BMW technician.
-
- Regular Member
- Posts: 603
- Joined: August 19th, 2002, 2:01 am
- Location: Guelph Ontario Canada
Re: 15.02 sec in my KL-ZE MX-3
I think I raced the same night at st thomas<P> picked up comp ta drag radials 100$ cash in guelph possible more to come ![Smile :)](./images/smilies/icon_smile.gif)
![Smile :)](./images/smilies/icon_smile.gif)
13.023 @ 105 mph
Re: 15.02 sec in my KL-ZE MX-3
HEy do you guys want to meet up sometime? I'm going to be in the l00 (H20L02) so that's right beside Guelph...<P>I wouldn't mind checkin' out a KLZE car... my car is mostly stock, and I've got my stock rims on right now as winter arrives soon.
Speed Kills - Drive a honda, live forever...
Re: 15.02 sec in my KL-ZE MX-3
Your MPH is supporting a faster time than that I think you should shift a little higher like at least 6800rpm. Also what ecu are you using the guys with the 1.8 ecu shift lower and the guys with the 2.5 ecu shift higher. with the 2.5 ecu I was shifting at 7600rpm on the stock tach that is about 7200rpm on the auto meter. Go to toronto motorsports tonight and we can see!
93 MX6 Black Plate "1SICKMX6"
- Custommx3
- Site Administrator
- Posts: 8391
- Joined: November 7th, 2000, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Lat 35.1N Lon -90W
- Contact:
Re: 15.02 sec in my KL-ZE MX-3
Paul ran a 14.8 last night the Mustng cobra in the lane beside him ran a 14.4. He stopped paul and said "damn that car is f$$$$n fast". It was so crazy.