![Sad :(](./images/smilies/icon_sad.gif)
New Real coilovers for our car!
-
- Regular Member
- Posts: 846
- Joined: October 19th, 2002, 2:01 am
- Location: Ottawa, Ontario, Canada
- Contact:
New Real coilovers for our car!
http://www.topspeedauto.com/ Makes 32 way dampening real coilovers for our car. For $899US.
) buy these coilovers and let us know how they are!
![Sad :(](./images/smilies/icon_sad.gif)
Mods:
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
- papa roached
- Senior Member
- Posts: 2761
- Joined: December 10th, 2002, 2:01 am
- Location: Montgomery, WVa
Re: New Real coilovers for our car!
hey, you stole my stuff :p i like that site so far though man
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
-
- Regular Member
- Posts: 846
- Joined: October 19th, 2002, 2:01 am
- Location: Ottawa, Ontario, Canada
- Contact:
Re: New Real coilovers for our car!
Ya the site you found is a sweet find!
It has a bunch of sweet stuff for our cars.
![Smile :)](./images/smilies/icon_smile.gif)
It has a bunch of sweet stuff for our cars.
Mods:
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
-
- Regular Member
- Posts: 1161
- Joined: January 14th, 2003, 2:01 am
- Location: Ottawa, Ontario, Canada
- Contact:
Re: New Real coilovers for our car!
I like the engine torque dampers
http://members.cardomain.com/spydie
"So I said to my one legged wife, I said...'Peg', you're 'cut-off'."
"So I said to my one legged wife, I said...'Peg', you're 'cut-off'."
-
- Regular Member
- Posts: 32
- Joined: July 30th, 2002, 2:01 am
- Location: British Columbia, Canada
- Contact:
Re: New Real coilovers for our car!
Are you sure they are made for our cars? When you go to listings, they only list Hondas and Mitsus.
pull hard,come easy. Second gear is hard at 7300
-
- Regular Member
- Posts: 1161
- Joined: January 14th, 2003, 2:01 am
- Location: Ottawa, Ontario, Canada
- Contact:
Re: New Real coilovers for our car!
keep looking....I saw MX3 listed on page 2 of the coilover applicationsOriginally posted by don walker:
Are you sure they are made for our cars? When you go to listings, they only list Hondas and Mitsus.
<small>[ November 04, 2003, 08:24 AM: Message edited by: Darren Hyderman ]</small>
http://members.cardomain.com/spydie
"So I said to my one legged wife, I said...'Peg', you're 'cut-off'."
"So I said to my one legged wife, I said...'Peg', you're 'cut-off'."
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Re: New Real coilovers for our car!
$899 us for a pair or all 4?
(im guessing pair, right?)
(im guessing pair, right?)
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
-
- Regular Member
- Posts: 846
- Joined: October 19th, 2002, 2:01 am
- Location: Ottawa, Ontario, Canada
- Contact:
Re: New Real coilovers for our car!
I'm pretty sure its all 4.
Mods:
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
-
- Regular Member
- Posts: 444
- Joined: March 24th, 2002, 2:01 am
- Location: Green Bay, WI
- Contact:
Re: New Real coilovers for our car!
COILOVER-MP95P MAZDA MP3 & 5 02-UP/PROTEGE 95-01 /ESCORT 92-97 / ZX-2 98-99 / MX-3 92-97 32 POINT DAMPER ADJUSTABLE COIL OVER KIT PER SET
there you have it....for the mx-3...per 899 per set. GREAT FIND, now if i only had my mx-3 i could actually use these
there you have it....for the mx-3...per 899 per set. GREAT FIND, now if i only had my mx-3 i could actually use these
i got a 90 pgt...but wish it was a mx-3 bp-t!
<img src="http://titan-racing.com/img/tr_site_logo.jpg" alt=" - " />
<img src="http://titan-racing.com/img/tr_site_logo.jpg" alt=" - " />
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Re: New Real coilovers for our car!
damn! if its all 4 im getting those in spring...now what kind of springs to couple those with...
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
Re: New Real coilovers for our car!
Those are with springs.Originally posted by Nd4SpdSe:
damn! if its all 4 im getting those in spring...now what kind of springs to couple those with...
nope-mx3
:: 2001 Mazda Mx-5 Sport // 2013 Volvo V40 D2 Momentum ::
Re: New Real coilovers for our car!
he's saying what kind of springs....u know, GC's come with ebibach, right??? ![Werd :werd:](./images/smilies/werd.gif)
![Werd :werd:](./images/smilies/werd.gif)
Derek Van Horne MX-3.com Member # 33
![Image](http://www.gtcars.ca/gallery/files/3/0/0/4/signature.jpg)
94 MX-3 Silver Stone Metallic CAR is SOLD
Car Domain Web page MX-3
Car Domain Web page SRT-4
![Image](http://www.gtcars.ca/gallery/files/3/0/0/4/signature.jpg)
94 MX-3 Silver Stone Metallic CAR is SOLD
Car Domain Web page MX-3
Car Domain Web page SRT-4
Re: New Real coilovers for our car!
on real coilovers I don`t think you can choose.
I believe that the springs and struts are matched against eachother.
nope-mx3
I believe that the springs and struts are matched against eachother.
nope-mx3
:: 2001 Mazda Mx-5 Sport // 2013 Volvo V40 D2 Momentum ::
Re: New Real coilovers for our car!
[quote]Originally posted by DVH:
he's saying what kind of springs....u know, GC's come with ebibach, right???
hehehe
Here you get the entire assembly to just put on the car, no need for spring compressor etc.
direct bolt on adjustable strut.
nope-mx3
<small>[ November 05, 2003, 05:51 PM: Message edited by: nope-mx3 ]</small>
he's saying what kind of springs....u know, GC's come with ebibach, right???
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Here you get the entire assembly to just put on the car, no need for spring compressor etc.
direct bolt on adjustable strut.
nope-mx3
<small>[ November 05, 2003, 05:51 PM: Message edited by: nope-mx3 ]</small>
:: 2001 Mazda Mx-5 Sport // 2013 Volvo V40 D2 Momentum ::
Re: New Real coilovers for our car!
Well i know that bro, I had them on my old eclipse..they pretty much just bolt on....i was just saying that i think what ND For SPD was saying was what springsOriginally posted by nope-mx3:
These can`t be compared to GC`s, it`s just not the same ballparkhehehe
Here you get the entire assembly to just put on the car, no need for spring compressor etc.
direct bolt on adjustable strut.
nope-mx3
![Shrug :shrug:](./images/smilies/shrug.gif)
Derek Van Horne MX-3.com Member # 33
![Image](http://www.gtcars.ca/gallery/files/3/0/0/4/signature.jpg)
94 MX-3 Silver Stone Metallic CAR is SOLD
Car Domain Web page MX-3
Car Domain Web page SRT-4
![Image](http://www.gtcars.ca/gallery/files/3/0/0/4/signature.jpg)
94 MX-3 Silver Stone Metallic CAR is SOLD
Car Domain Web page MX-3
Car Domain Web page SRT-4