ZX2 Struts ( Where i bought them, How i got them, and Ho

[zytariuk]

Here is everything you will need to install the ZX2 Struts successfully. **All prices are in Canadian**<p>PART NUMBER: M-18000-Z2
DESCRIPTION: Heavy duty Tokico struts performance tuned to match Eibach springs for ZX2 suspension. Provide improved body control with firmer ride. Set of 4 struts.
PRICE: C$ 290.72 (per kit)
PHOTO:
:p .<p>Where did i buy all my ZX2 parts from?
BARRIE FORD
55 Mapleview drive west, BARRIE, ON L4N 9H7 CANADA
PARTS DIRECT LINE (705) 737-3701
FAX: (705) 737-0447
http://www.barrieford.com<p>
How long does it take to get them?
It will take them approximately 7-10 business days to get them in.<p>
Any shipping costs?
Yes, it's ~C$ 50.00 to have them shipped.<p>
How the heck do i install these suckers? I thought they were meant for the Ford Escort ZX2!
Everything you need to know is at http://www.automediazone.com/pro/ZX2_strut_install.htm<p>
What are good springs to use with these ZX2 struts?
Eibach Pro Kit Lowering Springs (1.3"F, 1.0"R) and Suspension Techniques (1.3"F, 1.3"R) seems to be the most popular. Personally, I’m using the suspension techniques.<p>
Why wouldn't i just get the Tokico Premium performance Struts?
- The Tokico's go for approximately C$185.00 (each). That's just over C$ $850.00 for the set!
- You void the warranty on the Tokico Premium performance struts if you drop your car lower than 1.5 inches.<p>
So what's so popular about the ZX2 struts?
The ZX2 struts are Tokico struts (good name), and they will be able to handle the stress of a lower drop, say around 1.75 inch drop. However, it's a very firm ride...though what do you expect when you lower a car!<p>
What about the KYB GR-2 struts (ea)
I have not heard good things about these struts on cars lowered at 1.5" or more. Though im sure they are just fine if you only want to drop about 1 inch. These suckers run about C$ 125.00 (each)<p>
What about MAZDASPEED Adjustable Struts?
These suckers are damn good struts. However, they are very expensive C $275.00 (each).<p>
Any knowen issues with the ZX2 struts?
Yes.
- They are 1/2" smaller than the stock OEM mx-3 struts. However, look on it on the bright side; it gives you an extra .5" drop!
- It will totally throw your chamber settings off. Don't worry about this, just take it in and get a 4-WHEEL ALIGNMENT. THIS IS VERY IMPORTANT.<p>
Questions and/or concerns?
zytariuk@hotmail.com<p>P.S: If you order them for Barrie Ford, ask for Shaun Dixon. He's the guy that helped me...<p>[ February 01, 2003: Message edited by: zytariuk ]</p>

[ProtegeSTS]

Thank You.<p>This should clear up 95% of the questions.

[zytariuk]

no prob bud. Im' still adding some more FAQ's...

[Custommx3]

let me know when your finished, Im going to add it to the FAQ

[zytariuk]

Ok, done.<p>[ January 30, 2003: Message edited by: zytariuk ]</p>

[lazzyie]

Good Job!

[zytariuk]

hehe thanks, this is the second version too. When i was doing the first verson i was seconds away from posting it and the damn power went out . I just flipped!!<p>[ January 31, 2003: Message edited by: zytariuk ]</p>

[DVH]

Very helpful steve, good job! I wanna lower my car a bit as well this summer......u think u could help me with the istallation..u seem to know what ur talking more than i do...lol<p>Haven't seen u in barrie at all....u park ur car for the winter?? <p>Anyways, talk to ya later bro.

[Custommx3]

Added to suspension FAQ

[zytariuk]

DVH, yah uhh there’s a very good reason why you haven't seen me on the road lately, I was clocked going 212km/h (between Barrie and Orillia). As a result, my licence is now under suspension . The OPP cops up by Orillia are pricks!!!<p>Far as installation goes, I could try n' help you out. My friend’s dad used to be a mechanic (he has all kinds of crazy tools) so he guided me though most of the installation. I refuse to do any work when it's as cold as it is now though (never again...it's brutal).<p>The guys at Barrie Ford were very helpful too!! So check em' out. <p>[ February 01, 2003: Message edited by: zytariuk ]</p>

[zytariuk]

hehe, me again . I just want to make it very clear to everyone that this is not as super cheap mod like most belive.<p>Front Dust Boots C$47.66 (for the pair)
Rear Dust Boots C$22.76 (for the pair)
Struts C$290.72 (for the SET....that's C$72.68 EACH)
Front Thrust bearings C$59.74 (for the set)<p>TAX C$66.88
SHIPPING C$25.00 (from Windsor,ON to Barrie,ON)
TOTAL: C$512.76 (Candian Currency)<p>If you candians out there were to order all this from oemfordparts.com, you will probably end up paying more money. Why? Border Charges / Shipping / Currency Exchange. Iv'e been screwed over by border charges time and time again .<p>[ February 01, 2003: Message edited by: zytariuk ]</p>

[Ryencool]

not a cheap mod? LOL, compared to the other options its very cheap. Im in the US, I have my zx2 struts and coilovers I got for a escort for under 450$, tell me any other setup that is cheaper than that and has teh ability to lower up to 4 inches?? just tryin to let people know what agood deal these struts are, THANKS ALOT for the faq, it was really needed

[zytariuk]

...Im just saying some people think it's cheaper than it really is.

[I_love_my_MX-3]

will my Ground controls fit on the zx-2s? i figure they will but i want to make sure.

[therealstasman]

.