MX-3.com

would a dsm t25 turbo be a good size for the 2.5 ze??
to small?
to big??

wich dsm engine did a t25 came out of...it thought they were all like td04h (or something like that)

oh you bet this turbo is too small
this is smaller than a t3 and the smallest 3t3 I've seen on the 2.5 was the t3 super 60 wich is a big t3

<small>[ November 07, 2004, 09:23 AM: Message edited by: babyblueMX3 ]</small>

ok cool hey babyblue what are some good turbos to stick on a ZE??

T04?

or garret T28?

what do you plan on using. i have a friend who might be able to get cheap turbos.

i'd say get a t3 super 60 or any t3/t4 turbos..

t28 are also too small and t4 is good if you are planning on BIG boost but if not stick with the others..

I personnaly have a t3t4

actually if you do the math and then look at the flow chart of the t3 super 60 its too small too. our engines (2.5) needs about 31 lbs/hr at 6500rpm. look at the maps to see which ones right for us. i'm useing a t3/t4 with a .63 turbine and a .60 t4 compressor. i will be starting at about 6 psi.

well if you're running low boost it should do the job...some people on probetalk are using it

dos anyone have a flow chart for the t25 because i have yet to fined a real full chart.

nope never saw a good one either but their's still this one ...

but this site says that a t25 is good for 210-250 bhp max

thats the best i can fined to. I want one with all the graphs and % on it