MX-3.com

Hey guys. I would go with one because I can get one very easily thru jgstools. It will pretty much still line up with my downpipe and intercooler piping with a little modification. I am just wondering about performance. Does anyone have any experience with a log manifold? Thanks in advance.

there's a person around my area with a 240 w/ a log manifold pushing around 300whp.

my friends crx is running 11.09's in the 1/4mi with a log manifold. they are perfectly fine, though ugly IMO. performance wise, as long as it's good construction, there's no problem using one.
<img src="http://www.stage6motorsports.com/images ... CN0040.jpg" alt=" - " />

<small>[ February 20, 2004, 10:29 PM: Message edited by: OsoSlo z28 ]</small>

Lance from JGS tools said that the log manifold design can support around 600 whp easily.

i was told that because each exaust port doesent have the same distance of travel like in a properly tuned header, that the high end wouldent be nearly as good as it could be. although they work just fine.