RS Turbo kit @ 15 spi

Minimonster · Post by **Minimonster** » August 4th, 2003, 7:13 pm

The RS kit I have been testing is now at 15 psi. This is still on the RS engine with 176k on mikes. stock computer with a Racing Mazda piggy back unit and 310 cc injectors. I have controll of timing and fuel. Fuel and timing is base on a map sensor. I still have 40% of injector to play with. I plan to complete the tuning at 15 psi as I need it to be reliable to sell. Its now 3 months at 15 psi and no issues. I hope to see 200 to 250 with this.

Marlon · Post by **Marlon** » August 4th, 2003, 7:22 pm

are you ric?
are u gonna make a kit for our car?

marshmallow15 · Post by **marshmallow15** » August 4th, 2003, 7:26 pm

yea thats ric.<p>is this kit for dohc or sohc? you making a kit for each powerplant? its good to hear on your progress.

Minimonster · Post by **Minimonster** » August 4th, 2003, 7:56 pm

Yes this is Ric. This kit will be on the site soon for sale. First I need to fine tune and get dyno #'s and chart for all to see. I will need to get a DOHC in to complete the tuning for that one too. <p>I cannot post too much on the kit. I dont want the moderators getting mad at me. So For now email me for more info on it.

jonathanj · Post by **jonathanj** » August 4th, 2003, 9:12 pm

hey whats up man , you should put close to 275 - 300 whp with 15 psi. i put down 195.2 and 199 ft pounds at 7 psi un tuned.

OsoSlo z28 · Post by **OsoSlo z28** » August 4th, 2003, 10:12 pm

sounds like this kit he's talking about now is for the sohc...which is some impressive #'s for that setup.

papa roached · Post by **papa roached** » August 5th, 2003, 4:28 am

IM SO BUYING ONE!

Curtis · Post by **Curtis** » August 5th, 2003, 5:13 am

wow this sounds really nice! cant wait for this production to come out. if you could, could you post any pics of it? for SOHC?

Minimonster · Post by **Minimonster** » August 5th, 2003, 1:09 pm

JadeMX3- this kit is on a 92 SOHC. The kit will be available in 3 stages for the budget minded. What's your setup like?

Pearl-JapSpec · Post by **Pearl-JapSpec** » August 5th, 2003, 2:06 pm

OOoo
perfect for me

monty73741 · Post by **monty73741** » August 5th, 2003, 4:56 pm

are u gonna be doing a setup for the dohc I4

Minimonster · Post by **Minimonster** » August 5th, 2003, 5:52 pm

Yes I will, I have one lined up.

monty73741 · Post by **monty73741** » August 5th, 2003, 5:54 pm

man if i were in texas u could use mine......
lol.......

UnkleDuke · Post by **UnkleDuke** » August 5th, 2003, 8:47 pm

This gives me hope again...I started rethinking my turboject with 192k kilometers on my sohc.
But if you've got 176k miles....?
Before I touch anything though, I'm replacing the water pump and rad. I have to get my cooling concerns under control.<p>BTW...Some guy at a shop in the States tells me that the part number of the connecting rods in a 323 GT(Which he insists is a B6E not a T) and the 94+ B6ZE dohc MX3 are the same. Also that these rods measure up to fit in the sohc fine.
Any thoughts?

NyNy · Post by **NyNy** » August 7th, 2003, 12:34 pm

What is the estimated cost of the kit?

MX-3.com

RS Turbo kit @ 15 spi

RS Turbo kit @ 15 spi

Re: RS Turbo kit @ 15 spi

Re: RS Turbo kit @ 15 spi

Re: RS Turbo kit @ 15 spi

Re: RS Turbo kit @ 15 spi

Re: RS Turbo kit @ 15 spi

Re: RS Turbo kit @ 15 spi

Re: RS Turbo kit @ 15 spi

Re: RS Turbo kit @ 15 spi

Re: RS Turbo kit @ 15 spi

Re: RS Turbo kit @ 15 spi

Re: RS Turbo kit @ 15 spi

Re: RS Turbo kit @ 15 spi

Re: RS Turbo kit @ 15 spi

Re: RS Turbo kit @ 15 spi