sideskirts - someone find another source!
sideskirts - someone find another source!
Are there any sideskirts that are close enough in length to the MX-3 from another car that would adapt easilly? We have few choices of sides and I do not like any of them. I want something low but simple.... I like the OEM style side just fine but in my opinion it should be lower... it just looks like it should be lower, at least to me. I'm not saying like scraping the ground stupid low or anything, but you know... something decent.
1992 MX-3 GS
KLZE - Fidanza Flywheel - CM IIR Clutch - Millenia IM - UR Pulley - IM Spacers - KL36 ECU
KLZE - Fidanza Flywheel - CM IIR Clutch - Millenia IM - UR Pulley - IM Spacers - KL36 ECU
-
- Senior Member
- Posts: 3338
- Joined: November 25th, 2001, 2:01 am
- Location: california
- Contact:
Re: sideskirts - someone find another source!
you mean something like these? http://boostedboogie.onlineshowoff.com
http://boostedboogie.notanorg.org
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
Re: sideskirts - someone find another source!
yes exactly like those! what car are those from? take much to fit them? =)
1992 MX-3 GS
KLZE - Fidanza Flywheel - CM IIR Clutch - Millenia IM - UR Pulley - IM Spacers - KL36 ECU
KLZE - Fidanza Flywheel - CM IIR Clutch - Millenia IM - UR Pulley - IM Spacers - KL36 ECU
-
- Senior Member
- Posts: 3338
- Joined: November 25th, 2001, 2:01 am
- Location: california
- Contact:
Re: sideskirts - someone find another source!
those are the mazdaspeed skirts that i molded w/ a set of rx-7 sideskirts and was a ***** to get fitted on my car. that's the final product though. total tally:
mazdaspeed skirts: 200 used
rx-7 skirts: free (used some skirts that i was going to install on the fd but got different skirts for instead. costed me around 150ish cause it came in a kit)
materials: $20ish
repaint: free at a nearby shop that said hooking up an mx-3 alone will pay for the skirts to be painted.
<small>[ February 29, 2004, 10:01 AM: Message edited by: MX-3.com ]</small>
mazdaspeed skirts: 200 used
rx-7 skirts: free (used some skirts that i was going to install on the fd but got different skirts for instead. costed me around 150ish cause it came in a kit)
materials: $20ish
repaint: free at a nearby shop that said hooking up an mx-3 alone will pay for the skirts to be painted.
<small>[ February 29, 2004, 10:01 AM: Message edited by: MX-3.com ]</small>
http://boostedboogie.notanorg.org
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
Re: sideskirts - someone find another source!
my only question is why the hell doesnt someone make sides just like those for our car... i want something exactly like that!!!!!
1992 MX-3 GS
KLZE - Fidanza Flywheel - CM IIR Clutch - Millenia IM - UR Pulley - IM Spacers - KL36 ECU
KLZE - Fidanza Flywheel - CM IIR Clutch - Millenia IM - UR Pulley - IM Spacers - KL36 ECU
-
- Senior Member
- Posts: 3338
- Joined: November 25th, 2001, 2:01 am
- Location: california
- Contact:
Re: sideskirts - someone find another source!
because most companies that support our cars are not into the style that is simple or looks like stock. i know it might be offensive to some of you, but face it. the only kind of kit you can find on mx-3s are something really aggressive except for the mazdaspeed/corksport bumper and sides. so i just decided to do these skirts to look different. also making a mold of them and making the skirts urethane are wayy better too. i dont want to ever have to have my skirts damaged and eaten up again (which is what happened and why i decided on a mold and making the urethane ones)
http://boostedboogie.notanorg.org
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
Re: sideskirts - someone find another source!
I agree 110% with the above statement. If only more people felt this way.... sigh....
1992 MX-3 GS
KLZE - Fidanza Flywheel - CM IIR Clutch - Millenia IM - UR Pulley - IM Spacers - KL36 ECU
KLZE - Fidanza Flywheel - CM IIR Clutch - Millenia IM - UR Pulley - IM Spacers - KL36 ECU
-
- Senior Member
- Posts: 2165
- Joined: December 7th, 2002, 2:01 am
- Location: windsor, ontario
- Contact:
Re: sideskirts - someone find another source!
that is how i feel also... i also agree with the eurethane... i wish we had a kit that wasn't fiberglass
ProjectMx
My BP and AWD build thread
Cardomain
93 Mx-3 GS with bp and GTR AWD system
93 Escort GT daily driving
My BP and AWD build thread
Cardomain
93 Mx-3 GS with bp and GTR AWD system
93 Escort GT daily driving
Re: sideskirts - someone find another source!
again i agree =)
1992 MX-3 GS
KLZE - Fidanza Flywheel - CM IIR Clutch - Millenia IM - UR Pulley - IM Spacers - KL36 ECU
KLZE - Fidanza Flywheel - CM IIR Clutch - Millenia IM - UR Pulley - IM Spacers - KL36 ECU
- monty73741
- Forum Moderator
- Posts: 2651
- Joined: February 11th, 2001, 2:01 am
- Location: baltimore,md usa
- Contact:
Re: sideskirts - someone find another source!
well in jection molding in real expensive....that why there is no eurothane kit,
& i agree...i got a set of oem sides....i love em
& i agree...i got a set of oem sides....i love em
Jason Danaher
Please Help Support MX-3.com
MX-3.com Online Store - http://www.mx-3.com/osv3
CafePress - http://www.cafepress.com/mx3com
Please Help Support MX-3.com
MX-3.com Online Store - http://www.mx-3.com/osv3
CafePress - http://www.cafepress.com/mx3com
- masonholmes
- Supporting Member
- Posts: 279
- Joined: November 26th, 2000, 2:01 am
- Location: Beverly WV, USA
- Contact:
Re: sideskirts - someone find another source!
I dunno bout you guys but I REALLY like these, and I'm not one for whacky bodykits either..
http://www.projectmazda.com/mx3/mycar/futurecolor/
http://www.projectmazda.com/mx3/mycar/futurecolor/
1993 MX-3 ~ SE * 2.5L Swap'd
1993 RX-7 ~ Rotary Performance Built
1996 MX-5 ~ M-Edition * Topless, Daily Driver
masonholmes@hotmail.com
1993 RX-7 ~ Rotary Performance Built
1996 MX-5 ~ M-Edition * Topless, Daily Driver
masonholmes@hotmail.com
-
- Senior Member
- Posts: 3391
- Joined: November 30th, 2001, 2:01 am
- Location: Stuttgart, Deutschland
- Contact:
Re: sideskirts - someone find another source!
IOW: the only skirts out there are pure rice! I hate the FX skirts, too agressive, and they don't really "flow" with any of the kits they are sold with. g-force skirts are ok, but still don't really flow well with any kit.Originally posted by marshmallow15:
because most companies that support our cars are not into the style that is simple or looks like stock. i know it might be offensive to some of you, but face it. the only kind of kit you can find on mx-3s are something really aggressive except for the mazdaspeed/corksport bumper and sides.
<img src="http://www.onlineshowoff.com/images/car ... skirts.jpg" alt=" - " />
Your skirts look badass though. I have a pair of corksport MS skirts i've yet to fit up. If i knew how to work with fiberglass, I'd have already modded them to cover the entire legnth of the side similar to how yours are.
<small>[ March 01, 2004, 10:24 AM: Message edited by: Gro Harlem ]</small>
Noble Green Metallic 93' GS Hybrid, 91' 1.8 323
DONATE TO MX-3.COM
DONATE TO MX-3.COM
-
- Senior Member
- Posts: 3338
- Joined: November 25th, 2001, 2:01 am
- Location: california
- Contact:
Re: sideskirts - someone find another source!
gro harlem, its actually pretty simple to do. i modified the skirts and blended them with some other skirts, body filler a few of the really rough spots, then made a fiberglass copy of the skirt itself. then to urethane it, i just covered in urethane and used the original and laid into the urethane, squeezed really tight and just let it dry. the urethane was really flexible so i fiberglassed the back for sturdiness.
if you haven't noticed, i chopped some of the top of the ms skirts (being too high it looked weird with the front side) and when blending the rest of the skirt with the ms skirt, it gets tricky to get everything to flow in once smooth piece. those that own the corksport/ms skirts know what i mean. the skirts curve inward when you move towards the front.
if you haven't noticed, i chopped some of the top of the ms skirts (being too high it looked weird with the front side) and when blending the rest of the skirt with the ms skirt, it gets tricky to get everything to flow in once smooth piece. those that own the corksport/ms skirts know what i mean. the skirts curve inward when you move towards the front.
http://boostedboogie.notanorg.org
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike