MX-3.com

can anyone plz tell me what im gonna need to mount a spoiler from a gs on to my rs im buying a gs spoiler from someone on the board and all he has is just the spoiler my car came with nothing just the black garnash over the 3rd brake light any help would be great

You dont need anything different.

All you have to do is open your hatch and remove your plastic interior pieces where your 3rd brake light is, the small one that gives you access to the brake light and one long one that is the width of your trunk. There are a few small bolts that hold the garnish on so remove them then pull slightly in the middle of the garnish because there is a plastic push pin holding the center. Then all you have to do is put the spoiler in its place, bolt it in, and replace the plastic pieces and you are done. Takes about 15 mins to do.<p>Good luck, Jeff

sweet ty for all the info