This just shows how little most people know about our cars.
http://www.rx7club.com/forum/showthread.php?s=&threadid=235180
some people just don't know
-
Tyler17rose
- Regular Member
- Posts: 846
- Joined: October 19th, 2002, 2:01 am
- Location: Ottawa, Ontario, Canada
- Contact:
Re: some people just don't know
Hes lucky it wasnt a KLZE'd mx-3. Then he would have truely been embaressed. But honestly how the **** did that SOC beat him! it has 88hp!
No offense to and SOC owners.
No offense to and SOC owners.
Mods:
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
-
Spydie
- Regular Member
- Posts: 1161
- Joined: January 14th, 2003, 2:01 am
- Location: Ottawa, Ontario, Canada
- Contact:
Re: some people just don't know
makes me want to join that page just to post SUCKER on the thread. 
<small>[ October 23, 2003, 09:58 PM: Message edited by: Darren Hyderman ]</small>
<small>[ October 23, 2003, 09:58 PM: Message edited by: Darren Hyderman ]</small>
http://members.cardomain.com/spydie
"So I said to my one legged wife, I said...'Peg', you're 'cut-off'."
"So I said to my one legged wife, I said...'Peg', you're 'cut-off'."
Re: some people just don't know
i gave them a few words.
-
papa roached
- Senior Member
- Posts: 2761
- Joined: December 10th, 2002, 2:01 am
- Location: Montgomery, WVa
Re: some people just don't know
OMFG!!!!!!!!!! teh pw0n!
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
-
rancid420potheadpunk
- Regular Member
- Posts: 182
- Joined: October 13th, 2003, 2:01 am
- Location: dalton, ga
- Contact:
Re: some people just don't know
i got a 92 1.6 ltr, 4 cylinder and ive beat alot of the cars that i've gone up against, easy, only two have beat me out of about 7 or 8 so far
-
Tyler17rose
- Regular Member
- Posts: 846
- Joined: October 19th, 2002, 2:01 am
- Location: Ottawa, Ontario, Canada
- Contact:
Re: some people just don't know
flaming_whatever .... passing people on the highway isnt considered racing or in any way a win... 
Mods:
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
Re: some people just don't know
If you drive a SOHC mx-3 and have won most of your races then you have not been racing any car that is worthy to race. I've had a sohc mx-3 before and they are hella slow. That guy must have a crappy car because if you lose to an mx-3, you are a pathetic driver or your car has issues.
Combat kit, Spectra blue paint, shaved, Black ADR flite 4 17's/ Yokahama ES 100's, straight through 2.5 inch cat back exhaust, CAI, Straight neck IM KLZE, poly filled motor mounts, Kl48/ Eprom chip, black altezzas, Wet Zex 75 shot, Walbro 255 fuel pump, Cosmo AFPR, GS SE all black interior, RF 1kbd amp, RF 12 HE2's (2), US acoustics 4 channel amp
My Cardomain site
My Cardomain site
-
Csillag
- Junior Member
- Posts: 24
- Joined: September 5th, 2003, 2:01 am
- Location: Carleton Place, ON
- Contact:
Re: some people just don't know
Well, if we're on the topic if somewhat bragging, my lil' '95 4 Cyl (DOHC),(std) with nothing more than intake and exhaust (oh yeah, and mostly gutted interior) recently (and sadly) took an IS300 from the line (after HE revved HIS engine first), and in my 3rd gear, he was laggin' behind...(but I dragged out my 1st gear alot longer than he was able to). Caught up to me at the next light, looked over, and then quickly took the first turn he could.... (I'm sure there was a glitch somewhere, but I'll take any win like that) 
Life's short, live it up!<p>http://www.cardomain.com/id/csillag
-
mitmaks
- Senior Member
- Posts: 8704
- Joined: September 10th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Spokane, WA
- Contact:
Re: some people just don't know
isnt this street racing??
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
http://www.cardomain.com/id/mitmaks
-
xXx_OTEP_xXx
- Regular Member
- Posts: 583
- Joined: September 16th, 2002, 2:01 am
- Location: Hartford, CT
Re: some people just don't know
you were the type of kid who ran and told all the teachers you could find when other kids were doing something they "weren't supposed to", eh? 
kidding around :p
kidding around :p
Sold my 95 RS "Little Peanut" but she will never be forgotten. 
-
xXx_OTEP_xXx
- Regular Member
- Posts: 583
- Joined: September 16th, 2002, 2:01 am
- Location: Hartford, CT
Re: some people just don't know
oh and the rx-7.. DAMN that's pathetic! hahaha he shouldn't be driving a nice car like that! 
Sold my 95 RS "Little Peanut" but she will never be forgotten.
-
Mnemonic
- Forum Moderator
- Posts: 3415
- Joined: September 3rd, 2002, 2:01 am
- Location: Eastern Hemisphere
- Contact:
Re: some people just don't know
ive been on that board for awhile and thats just ****ing retarded an mx-3 beat a rx7 specially a 3rd gen, you would have to have a bpt swap to even compete
08 Infiniti G37s 6speed (The Daily)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
-
Spydie
- Regular Member
- Posts: 1161
- Joined: January 14th, 2003, 2:01 am
- Location: Ottawa, Ontario, Canada
- Contact:
Re: some people just don't know
well the way they are making fun of our UBB they STILL don't get it. I'd love to see one of their 7's go up against Jeffs old or Dave Lauziers old MX.
But this guy ISN'T lucky he wasn't racing a ZE's MX3......it's WAY more embarassing losing to a SOHC. At least he could maintain a little dignity if a ZE beat him.
But this guy ISN'T lucky he wasn't racing a ZE's MX3......it's WAY more embarassing losing to a SOHC. At least he could maintain a little dignity if a ZE beat him.
http://members.cardomain.com/spydie
"So I said to my one legged wife, I said...'Peg', you're 'cut-off'."
"So I said to my one legged wife, I said...'Peg', you're 'cut-off'."
-
guyaverage
- Regular Member
- Posts: 334
- Joined: March 21st, 2003, 2:01 am
- Location: Cincinnati
Re: some people just don't know
It doesnt take a whole lot of thought to figure this one out. The guy posting this nonsense has 3 whole posts to the Rx7 forum, and writes in that he has an FD Rx7 (one of the faster cars in the world) and loses a race to a stock 1.6 Mx3 (one of the slowest cars in the universe). Having owned both the Mx and the Rx, I can safely say one of several scenarios is at play here:
The guy is a troll trying to get people fired up, and this "race" never happened (the most likely reality here); or
The Mx3 was stock, up against one seriously sick FD Rx7, with a minimum one bad turbo and/or at least one bad/cracked/missing apex seal; or
The FD was sick, AND the Mx3 was ANYTHING but stock.
This "race" never happened. Doesnt matter anyway, not supposed to talk about that here...we're all probably banned for life now...
The guy is a troll trying to get people fired up, and this "race" never happened (the most likely reality here); or
The Mx3 was stock, up against one seriously sick FD Rx7, with a minimum one bad turbo and/or at least one bad/cracked/missing apex seal; or
The FD was sick, AND the Mx3 was ANYTHING but stock.
This "race" never happened. Doesnt matter anyway, not supposed to talk about that here...we're all probably banned for life now...
"The answer is: More power. I dont care what the question is."
-Tim Allen
-Tim Allen