Just bought a '93 GS SE

General Mazda MX-3 Discussions
Post Reply
mx3man83
Regular Member
Posts: 1921
Joined: August 25th, 2002, 2:01 am
Location: tucson, az

Just bought a '93 GS SE

Post by mx3man83 »

Needs a new rear bumper, minor body work, paint on hood and roof. Leather seats and interior in good shape, engine running strong, cold ac, full 2.5 magna flow exhaust set up, ractive air filter, and yellow head lights(ewww). Bought for 1,200 buckaroos, originially bought for parts to fix up my other one since some recent activities have put a few major blockades in my road to a klze and a body kit. Oh, by the way, in my black GS me and my friends were shot at. 4 bullets through the passenger door, 2 in the panel right under the door, and 1 through the window. I've also had a messed up hood and bumper from my drunken escapade a few months ago(dont drive drunk!!!). I was forced to buy the SE now since the engine in my other GS just went kaput. Had major oiling problems sine i got it, and finally it went to crap. Current plans: Pull KLZE from friends Probe, rebuild, and put into the black GS. Put SE interior parts in the GS, put SE hood onto GS, full body kit, and swap AC system from SE into GS(came without AC). Any thoughts? Anyone want any parts from a K8??
Combat kit, Spectra blue paint, shaved, Black ADR flite 4 17's/ Yokahama ES 100's, straight through 2.5 inch cat back exhaust, CAI, Straight neck IM KLZE, poly filled motor mounts, Kl48/ Eprom chip, black altezzas, Wet Zex 75 shot, Walbro 255 fuel pump, Cosmo AFPR, GS SE all black interior, RF 1kbd amp, RF 12 HE2's (2), US acoustics 4 channel amp
My Cardomain site
User avatar
mitmaks
Senior Member
Posts: 8704
Joined: September 10th, 2001, 2:01 am
antispam: ~SPAM*SUX~
Location: Spokane, WA
Contact:

Re: Just bought a '93 GS SE

Post by mitmaks »

u dont know what youre talking about dude, if id have that se id rather fix it up and keep it forever only 2000 made of them, i am so happy i have mine, id buy another one, but its urs if you wanna screw it all up its up to you dude, but myself, id fix it up. if you need hood ive got one. let me know.
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
Image
User avatar
Casino
Regular Member
Posts: 779
Joined: April 20th, 2002, 2:01 am
Location: Sudbury Ontario Canada / windsor

Re: Just bought a '93 GS SE

Post by Casino »

ya dude i would keep that SE its one of a kind well um 1 of 2000 lol but u get my drift
http://www.realtimeperformance.ca

03 miata, formally bottle fed 96 DOHC
User avatar
mx3TT
Supporting Member
Posts: 1144
Joined: June 22nd, 2003, 2:01 am
Location: NY
Contact:

Re: Just bought a '93 GS SE

Post by mx3TT »

Yeah I am with them, dont distroy the SE. You are much better off with it over your GS. Also, in your friends probe, does he have a KL-DE, which is the stock engine, or a KL-ZE which is j-spec?
Chris

Image
MY MX-3 PICTURES
MX-3.com's online store - SUPPORT MX-3.COM
XxLuieLinesxX
Regular Member
Posts: 149
Joined: June 21st, 2003, 2:01 am
Location: Long Island, NY

Re: Just bought a '93 GS SE

Post by XxLuieLinesxX »

any1 want mine....$1,500 negotiable
User avatar
mx3TT
Supporting Member
Posts: 1144
Joined: June 22nd, 2003, 2:01 am
Location: NY
Contact:

Re: Just bought a '93 GS SE

Post by mx3TT »

Didnt realize you were so close to me, whats wrong with it for 1,500. Email me at xnerx@rcn.com and put some pics and all details.
Chris

Image
MY MX-3 PICTURES
MX-3.com's online store - SUPPORT MX-3.COM
mx3man83
Regular Member
Posts: 1921
Joined: August 25th, 2002, 2:01 am
Location: tucson, az

Re: Just bought a '93 GS SE

Post by mx3man83 »

<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by mitmaks:
u dont know what youre talking about dude, if id have that se id rather fix it up and keep it forever only 2000 made of them, i am so happy i have mine, id buy another one, but its urs if you wanna screw it all up its up to you dude, but myself, id fix it up. if you need hood ive got one. let me know.<hr></blockquote><p>First of all you probaly shouldnt start off with " you dont know what you are talking about". I do know what i'm talking about. I knew that only 2k of them were made. The car has some damage that may not be repairable, that is why I may part it out. The girl that had it was rear ended pretty hard and the whole rear ende kind of tweaked down about an inch or so. It drives just fine though. I'm going to try to pull the dents and fill them in. If I am successful, then i will keep it and fix it up, if not, then its officially my parts car. I forgot to mention it came with 16's too. Not too sure what kind but they are pretty cool looking. Leather seats are in good shape, interior is in good shape, and the engine has 161k miles on it. Surprisingly the engine doesnt smoke at all, doesnt tick, and starts up immediately. I'm very happy with my purchase, and whatever i decide to do im sure it will be worth it. Mitmaks, i know about your hood. I've tried to get ahold of you before but you never reply. I thinmk i read somewhere that you live in cali? What part?? Im in arizona, about a 5 hour drive to SD.
Combat kit, Spectra blue paint, shaved, Black ADR flite 4 17's/ Yokahama ES 100's, straight through 2.5 inch cat back exhaust, CAI, Straight neck IM KLZE, poly filled motor mounts, Kl48/ Eprom chip, black altezzas, Wet Zex 75 shot, Walbro 255 fuel pump, Cosmo AFPR, GS SE all black interior, RF 1kbd amp, RF 12 HE2's (2), US acoustics 4 channel amp
My Cardomain site
User avatar
mx3TT
Supporting Member
Posts: 1144
Joined: June 22nd, 2003, 2:01 am
Location: NY
Contact:

Re: Just bought a '93 GS SE

Post by mx3TT »

You didnt mention it was rear ended. That changes the whole story. If everything is off then no I wouldnt drive it either and I would swap everything. But if it is fixable, within reason, then I would go with the SE.
Chris

Image
MY MX-3 PICTURES
MX-3.com's online store - SUPPORT MX-3.COM
mx3man83
Regular Member
Posts: 1921
Joined: August 25th, 2002, 2:01 am
Location: tucson, az

Re: Just bought a '93 GS SE

Post by mx3man83 »

<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by mx3man83:
[QB]Needs a new rear bumperQB]<hr></blockquote><p>
You are right, i didnt say it was rear ended but i hinted at it. Either way, you dont say "you dont know what you are talking about". I'm definitely hoping that i can fix it, but we shall see. Either one i choose to keep, its going to be KLZE powered. Im currently in the process of rebuilding that sucka. Cannot wait 'til its finished.
Combat kit, Spectra blue paint, shaved, Black ADR flite 4 17's/ Yokahama ES 100's, straight through 2.5 inch cat back exhaust, CAI, Straight neck IM KLZE, poly filled motor mounts, Kl48/ Eprom chip, black altezzas, Wet Zex 75 shot, Walbro 255 fuel pump, Cosmo AFPR, GS SE all black interior, RF 1kbd amp, RF 12 HE2's (2), US acoustics 4 channel amp
My Cardomain site
mx3man83
Regular Member
Posts: 1921
Joined: August 25th, 2002, 2:01 am
Location: tucson, az

Re: Just bought a '93 GS SE

Post by mx3man83 »

<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by mx3TT:
Also, in your friends probe, does he have a KL-DE, which is the stock engine, or a KL-ZE which is j-spec?<hr></blockquote><p>HE swapped the KLZE in about 4 months ago. So yes, it is a KLZE.
Combat kit, Spectra blue paint, shaved, Black ADR flite 4 17's/ Yokahama ES 100's, straight through 2.5 inch cat back exhaust, CAI, Straight neck IM KLZE, poly filled motor mounts, Kl48/ Eprom chip, black altezzas, Wet Zex 75 shot, Walbro 255 fuel pump, Cosmo AFPR, GS SE all black interior, RF 1kbd amp, RF 12 HE2's (2), US acoustics 4 channel amp
My Cardomain site
User avatar
mx3TT
Supporting Member
Posts: 1144
Joined: June 22nd, 2003, 2:01 am
Location: NY
Contact:

Re: Just bought a '93 GS SE

Post by mx3TT »

Thats good then. Looks like you have all the pieces, now you have to put them all together.
Chris

Image
MY MX-3 PICTURES
MX-3.com's online store - SUPPORT MX-3.COM
User avatar
mitmaks
Senior Member
Posts: 8704
Joined: September 10th, 2001, 2:01 am
antispam: ~SPAM*SUX~
Location: Spokane, WA
Contact:

Re: Just bought a '93 GS SE

Post by mitmaks »

i am sorry man, well anyways try to keep it, nice car, post pics if you can. i never got any messages from you needing a hood. i am in WA state if you want it, $100 if you pick up. btw mine was rebuilt too, had whole front damaged and as you see now its pretty nice
oh ya heres link<p>http://www.cardomain.com/member_pages/view_page.pl?page_id=390777
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
Image
Post Reply

Return to “General Mazda MX-3”