Page 1 of 1
Re: No spark after going through 3 distys.
Posted: October 11th, 2004, 3:33 pm
by Tyler17rose
Make sure your grounds are all intact.
Re: No spark after going through 3 distys.
Posted: October 11th, 2004, 4:27 pm
by DavidOS
make sure the plugs goto the disty in the right order
Re: No spark after going through 3 distys.
Posted: October 11th, 2004, 9:36 pm
by Zoso124
Read all your voltages back at the ECU with Ignition on and off. You can find this all in the troubleshooting part of the manual.