Page 1 of 1

klze with k8ecu

Posted: June 4th, 2004, 12:01 am
by MI-Archangel
im told my interals will fry by a local mechanic. is it safe to drive on it for like 2 weeks>?

Re: klze with k8ecu

Posted: June 4th, 2004, 12:04 am
by papa roached
its gonna run super rich, see if you can track down a MX-6 or Probe GT VAF, that will run decent from what im told

Re: klze with k8ecu

Posted: June 4th, 2004, 1:37 pm
by Silver_Wraith
I'm Currently Running an mx-6 ecu until corksport can send me my klze ecu. But The only thing that i've noticed is that the timing in lower rpm's isn't exact and can seem a bit sluggish at times but over all it works and i don't get that bad of gas mileage out of it.

Re: klze with k8ecu

Posted: June 4th, 2004, 2:57 pm
by killerpickle
which vaf are you using with the mx6 one? You have to use the 2.5 vaf. The 1.8 will throw codes and run like garbage.

Re: klze with k8ecu

Posted: June 4th, 2004, 3:08 pm
by bubbaflaat
I'm running a K8 ecu and a 2.5Ltr VAF, it runs alot better with that VAF than the K8 VAF. Lots better gas mileage and smoother running.

Re: klze with k8ecu

Posted: June 4th, 2004, 6:07 pm
by Silver_Wraith
I'm Still running the stock k8 vaf and i'm not throwing any codes no problems other than previously stated.

Re: klze with k8ecu

Posted: June 4th, 2004, 7:16 pm
by killerpickle
the mx6 ecu and the 1.8 vaf do not go well together, trust me :)