Page 1 of 1
3.0 V6 ... hmmmm
Posted: April 10th, 2004, 2:56 pm
by DavidOS
ok the 929 has a 3.0 v6, alot cheaper then the klze swaps, runs 200hp and 200ft.lbs at 3500 rpm.
question? does anyone know the dimensions of this 3.0 v6 cause if its similar to the
kl engines = 620x675x640
if the 3.0 is the same you could quite easily get alot more torque/hp out of this larger displacement.
any ideas?
Re: 3.0 V6 ... hmmmm
Posted: April 10th, 2004, 3:03 pm
by mitmaks
im not sure if you could find that engine for cheaper than klze, I wanted to swap in millenia S supercharged 2.5L
Re: 3.0 V6 ... hmmmm
Posted: April 10th, 2004, 3:08 pm
by DavidOS
i just found a bunch of 3.0 engines online in ontario canada running for about 400 bucks each.
Re: 3.0 V6 ... hmmmm
Posted: April 10th, 2004, 3:35 pm
by Zoso124
Just like the Millenia its too big and not worth the headache.
Re: 3.0 V6 ... hmmmm
Posted: April 10th, 2004, 8:37 pm
by TsiMiata
It is an enormous engine. The other problem is it's RWD. It won't bolt to our transmisions.
Re: 3.0 V6 ... hmmmm
Posted: April 10th, 2004, 9:38 pm
by killerpickle
the supercharged millenia is a 2.3litre
Re: 3.0 V6 ... hmmmm
Posted: April 11th, 2004, 12:13 am
by papa roached
but its physically to big, the whole top end of the motor is setup differently
Re: 3.0 V6 ... hmmmm
Posted: April 11th, 2004, 12:18 am
by Gro Harlem
its a JE motor, ridiculously huge, and is mounted differently. No chance in hell it'd fit.