MX-3.com

I was wonedering if anyone knew where pin 1M is located at. I tried searching but i could not find anything. i don't have a chart on the back of my ecu that tells me which pin is what.

it is the pin that takes the speed limiter of the ecu.

the speed limiter is there for a reason, you should leave it alone.

It's there because japanese law requires it. Since we don't live in japan theres no need to keep it.

IIRC, the connector closest to the firwall is the #1 port and the letters start from the top. The letter A is at the top B below it and C is right beside A. Someone should back me up on this but I'm pretty sure this is correct. If you go to PT they have a sticky about the pinouts, the only difference is the probe is rotated where the pinouts are facing the console. Hope this helps.

I found out it is a black and whit wire. on the top row, fifth from the firewall. -I cut it and everything works fine on my dash. I have not gotten a chance to go that fast yet, but hopefully it worked. I'll post it when i do. Thanks for the help.

Originally posted by mightym0use5:
I found out it is a black and whit wire. on the top row, fifth from the firewall. -I cut it and everything works fine on my dash. I have not gotten a chance to go that fast yet, but hopefully it worked. I'll post it when i do. Thanks for the help.

which race trak do you race at? I want to take my car that fast but there is no track around here with a straight away long enough.

it's marked on the circuit board inside the ecu

I just wanted to add that it does work. I was able to hit 122 easy. Had to slow down for other reasons.

Sinner....

Good thread, I was searching for the location of that dang pin when I had the kl31 ecu. I hated not being able to go past 115(I think that was it). Temporarily, I have the probe gt ecu and vaf so I don't have a speed limiter. I am going to the dyno in a few weeks and I'm going to do a probe gt ecu and vaf vs. kl31 ecu and je50 vaf to see the actual differences between the two.

are u guys sure that it is not the 6th one from the firewall cause the other ones are pink,brown, etc... untill i reach the 6th which is black and white. oh and before i cut this wire is it a possitive thing and wont mess anything up besides my driving record?