Emissions test failure
Posted: October 14th, 2003, 9:02 pm
First the specs, I have a 94 MX3 GS w/ the 1.8 V6
As some of you will know we have to do the drive clean every 2 yrs in Ontario. At speed my car passed with flying colours but I run into problems at idle speeds. My idle speed for the test was 880RPM, I believe that is too high and it should be about 650RPM.
The question I have is how can I easily slow the idle speed down.
The second thing I would like to know is where do I find the EGR sensor and how do I tell if it(they) are screwed?
Any help would be much appreciated
As some of you will know we have to do the drive clean every 2 yrs in Ontario. At speed my car passed with flying colours but I run into problems at idle speeds. My idle speed for the test was 880RPM, I believe that is too high and it should be about 650RPM.
The question I have is how can I easily slow the idle speed down.
The second thing I would like to know is where do I find the EGR sensor and how do I tell if it(they) are screwed?
Any help would be much appreciated