ssautochrome headers??

V6 Technical/Performance Discussions
Sean Mandell
Regular Member
Posts: 736
Joined: February 8th, 2002, 2:01 am
Location: Toronto

ssautochrome headers??

Post by Sean Mandell »

These are ss and have the same primary length of the pacesetters but better quality for only $235 U.S.. Anyone ordered these yet? I think they would sound a lot better than the mild steel ones that pacesetter offers. :shrug:
"A hero and a coward both feel fear but it is the hero who reacts first while the coward hides behind the hero"
curtklze
Regular Member
Posts: 1749
Joined: April 17th, 2002, 2:01 am
Location: Okotoks, Alberta Canada
Contact:

Re: ssautochrome headers??

Post by curtklze »

here is the link, http://www.ssautochrome.com/level.itml/icOid/1063

you should ask around on probe talk to see if those guys have used them.

also you could call them or e-mail them and ask if they are based off of the P.S. ones, cause I saw what you have to do to get a set of PaceSetter ones to fit onto a 2.5 V6, you have to bend and hammer them and they look like garbage when your done.
DONT SHIP WITH UPS!!! DIE UPS DIE!!!!!
Yes, I AM a bastard
Here is my web site, I made this last year but didnt feel like shareing it untill now.
http://members.rogers.com/curts-klze/

How does this guy know so much?
He's a licenced BMW technician.
User avatar
papa roached
Senior Member
Posts: 2761
Joined: December 10th, 2002, 2:01 am
Location: Montgomery, WVa

Re: ssautochrome headers??

Post by papa roached »

i just got a set, but its gonna be a while before i even get to try and install them, i still need my ZE
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs

Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
larz13
Regular Member
Posts: 93
Joined: April 18th, 2001, 2:01 am
Location: Elgin, MB Canada

Re: ssautochrome headers??

Post by larz13 »

I think you mean $325 not 235$
User avatar
papa roached
Senior Member
Posts: 2761
Joined: December 10th, 2002, 2:01 am
Location: Montgomery, WVa

Re: ssautochrome headers??

Post by papa roached »

i got mine for $150 off ebay
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs

Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
TsiMiata
Regular Member
Posts: 1074
Joined: July 30th, 2003, 2:01 am
Location: Cape Cod, MA
Contact:

Re: ssautochrome headers??

Post by TsiMiata »

There is a thread on these on probetalk
93 MX-3 GS- ZE, KL31 ECU, Fidanza Flywheel, CM Stage 2-R clutch, Hotshot Headers

99 Subaru Impreza RS, the new toy

91 Eagle Talon Tsi AWD *RIP*
User avatar
papa roached
Senior Member
Posts: 2761
Joined: December 10th, 2002, 2:01 am
Location: Montgomery, WVa

Re: ssautochrome headers??

Post by papa roached »

the basic gyst is they are better than pacesetters, a bit at least, how can they be worse, and the gains are decent
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs

Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
curtklze
Regular Member
Posts: 1749
Joined: April 17th, 2002, 2:01 am
Location: Okotoks, Alberta Canada
Contact:

Re: ssautochrome headers??

Post by curtklze »

Originally posted by TsiMiata:
There is a thread on these on probetalk
could you please post the link to the thread, I cant use the search featur on probe tralk.
DONT SHIP WITH UPS!!! DIE UPS DIE!!!!!
Yes, I AM a bastard
Here is my web site, I made this last year but didnt feel like shareing it untill now.
http://members.rogers.com/curts-klze/

How does this guy know so much?
He's a licenced BMW technician.
Mnemonic
Forum Moderator
Posts: 3415
Joined: September 3rd, 2002, 2:01 am
Location: Eastern Hemisphere
Contact:

Re: ssautochrome headers??

Post by Mnemonic »

yea ive emailed this guy and he's given me a 100% money back guarentee on them so im going with them as well
08 Infiniti G37s 6speed (The Daily)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs

01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Sean Mandell
Regular Member
Posts: 736
Joined: February 8th, 2002, 2:01 am
Location: Toronto

Re: ssautochrome headers??

Post by Sean Mandell »

All I have to say is that the pacesetter headers will give u the best gains 4 the klze but the drawbacks are fitment issues and sound. So these guys at ssautochrome basically innovated the pacesetters and have done it in SS which will sound way better. I think I may have to bite the bullet with these because I like the price and quality seems to be far better then the ps pos. :shrug: :shrug: :2thumbsup:
"A hero and a coward both feel fear but it is the hero who reacts first while the coward hides behind the hero"
User avatar
papa roached
Senior Member
Posts: 2761
Joined: December 10th, 2002, 2:01 am
Location: Montgomery, WVa

Re: ssautochrome headers??

Post by papa roached »

SS headers for $150? i couldnt pass that price on them
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs

Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
User avatar
babyblueMX3
Supporting Member
Posts: 3755
Joined: February 23rd, 2003, 2:01 am
Location: Gatineau,Quebec,Canada
Contact:

Re: ssautochrome headers??

Post by babyblueMX3 »

here's the link on probetalk.com

probetalk review

another thread on them
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
User avatar
papa roached
Senior Member
Posts: 2761
Joined: December 10th, 2002, 2:01 am
Location: Montgomery, WVa

Re: ssautochrome headers??

Post by papa roached »

LOOKIE WHAT THE MAIL MAN BRUNG ME TODAY!

<img src="http://images.cardomain.com/member_imag ... 1_full.jpg" alt=" - " />

to bad they arent going on till i get my ZE, stainless headers for $150, im happy and what i have read is that they arent that bad

<small>[ October 14, 2003, 09:53 PM: Message edited by: papa roached ]</small>
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs

Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
User avatar
Steeb
Regular Member
Posts: 1897
Joined: June 29th, 2001, 2:01 am
Location: CA, USA
Contact:

Re: ssautochrome headers??

Post by Steeb »

any of u guys got em on yet?
C-MX-DA3
Regular Member
Posts: 344
Joined: May 27th, 2002, 2:01 am
Location: NU JERU
Contact:

Re: ssautochrome headers??

Post by C-MX-DA3 »

papa roached, do you still have the link from ebay for these headers?. thanks
Post Reply

Return to “V6 Technical/Performance”