Page 1 of 1
kl-ze disty help?
Posted: June 10th, 2003, 5:21 pm
by mrprecidia
I need some help installing my klze disty on my ze right now I am using the one from my k8 and I want to install an external coil and ignition module so I bought a ze disty my problem is there is only 1 plug with 4 wires on the ze and on the k08 disty there are 2 plugs 1 for the ignitor which i know is eliminated but the other plug has six wires what do i do. any schematics for the ze disty would be great.
Re: kl-ze disty help?
Posted: June 11th, 2003, 4:44 am
by mrprecidia
anyone?
Re: kl-ze disty help?
Posted: June 11th, 2003, 10:34 am
by Spydie
Jeff Abrams has a MSD schematic on his site.
Re: kl-ze disty help?
Posted: June 11th, 2003, 12:59 pm
by mrprecidia
I don't want the schematic for the msd I want the schematic for the distributo so I can figure out what each of the wires is for.
Re: kl-ze disty help?
Posted: June 11th, 2003, 1:57 pm
by Zoso124
This is the best and really only post your seeing on this topic. Hopefully Mark can help you.<p>
http://www.probetalk.com/forums/showthread.php?s=&threadid=1700983430&highlight=distributor<p>[ June 11, 2003: Message edited by: Zoso124 ]</p>
Re: kl-ze disty help?
Posted: June 11th, 2003, 2:27 pm
by Spydie
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by mrprecidia:
I don't want the schematic for the msd I want the schematic for the distributo so I can figure out what each of the wires is for.<hr></blockquote><p>Look at the schematic anyway.....it says what the wires are for.