kl-ze disty help?

[mrprecidia]

I need some help installing my klze disty on my ze right now I am using the one from my k8 and I want to install an external coil and ignition module so I bought a ze disty my problem is there is only 1 plug with 4 wires on the ze and on the k08 disty there are 2 plugs 1 for the ignitor which i know is eliminated but the other plug has six wires what do i do. any schematics for the ze disty would be great.

[mrprecidia]

anyone?

[Spydie]

Jeff Abrams has a MSD schematic on his site.

[mrprecidia]

I don't want the schematic for the msd I want the schematic for the distributo so I can figure out what each of the wires is for.

[Zoso124]

This is the best and really only post your seeing on this topic. Hopefully Mark can help you.<p>http://www.probetalk.com/forums/showthread.php?s=&threadid=1700983430&highlight=distributor<p>[ June 11, 2003: Message edited by: Zoso124 ]</p>

[Spydie]

<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by mrprecidia:
I don't want the schematic for the msd I want the schematic for the distributo so I can figure out what each of the wires is for.<hr></blockquote><p>Look at the schematic anyway.....it says what the wires are for.