Page 1 of 1
ms8 manifold
Posted: April 4th, 2003, 12:29 pm
by MXKreepscort
I will beg etting an ms8 intake manifold soon and i was wondering from wich millenia engine it comes from, the 2.5 or the 2.3, I would think the 2.5 but im just making sure. thanx
Re: ms8 manifold
Posted: April 4th, 2003, 1:37 pm
by Sonicxtacy02
definitely the 2.5. The 2.3 is completely different.
Re: ms8 manifold
Posted: April 5th, 2003, 7:42 pm
by MXKreepscort
ok, now I could use the intake manifold from the US millenia correct? or is there a diference in the j spec one?
Re: ms8 manifold
Posted: April 6th, 2003, 1:40 am
by MXKreepscort
anyone?
Re: ms8 manifold
Posted: April 6th, 2003, 6:05 am
by IanL
I think you'll find that the jspec doesn't have the fitting for the EGR valve. But you can drill & tap (not sure where) if you want to retain EGR. If I haven't missed something, the export spec manifold would be the more straightforward job.
Re: ms8 manifold
Posted: April 6th, 2003, 10:39 am
by pelado
If you get a Jspec MS-8 manifold, then it has a block off plate on the backside of the manifold where the US Millenia has an EGR valve bolted to.
Re: ms8 manifold
Posted: April 6th, 2003, 2:08 pm
by MXKreepscort
ok, I'm thinking of getting the US one then, but is there any diference in hp gains between the 2 intake manifolds?
Re: ms8 manifold
Posted: April 7th, 2003, 8:40 am
by Zoso124
No
Re: ms8 manifold
Posted: April 7th, 2003, 10:39 am
by MXKreepscort
ok, thnx