Which VAF

V6 Technical/Performance Discussions
Post Reply
Hy300
Regular Member
Posts: 654
Joined: June 18th, 2002, 2:01 am
Location: York, Pa
Contact:

Which VAF

Post by Hy300 »

Don't get pissed at me for asking, I've been around long enough to know what a VAF is. Here's the question though... mine died on me earlier today I was talking to a few people about where I could get another. However, I have a KLZE swap in mind for the near future and don't want to get one that won't work. I've heard that the VAF from the KLZE works best.<p>Here's what I found, information I gathered from other people... MX-3 uses model number JE50, while the KL uses model number KL02. However, I heard that the KLZE uses the K8 VAF, and that the KL03 VAF puts out different signals.<p>Is any of this true? Should I buy another K8 VAF, or one from a KL03, or what?
lazzyie
Regular Member
Posts: 1094
Joined: May 24th, 2002, 2:01 am
Location: Fing Boise Idaho Hell!

Re: Which VAF

Post by lazzyie »

all that is true. use the mx-3 vaf and the ze ecu(i sell these).
93 Mx-3 GS klze swapped(sold)
96 Integra LS DD
91 Crx Si drag car
2.0L sleeved gsr block, forged internals, skunk2 valvetrain, HP racing intake manifold, Holset H1 turbo, 1000cc injectors, short geared lsd transmission, 3" turboback exhaust. 20 psi :)
eunosads
Regular Member
Posts: 203
Joined: August 14th, 2001, 2:01 am
Location: Sydney, NSW, Australia
Contact:

Re: Which VAF

Post by eunosads »

JE50 VAF with a KLZE ECU
KL02 VAF with a KLDE (03) ECU
- EUNOS 30X -
Post Reply

Return to “V6 Technical/Performance”