Mazda6 with KLZE twin turbo

[bout2001]

<p><p><p><p> <blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>High Performance four door saloon from Mazda! Although not yet in production, on the 2000 Geneva motor show, Mazda showed us that there are hopes for all you Mazda-enthusiasts out there. The 626 MPS is a 2,5 litre V6 AWD (full time) saloon, based on the re-launched 626 model. The engine is a 2496cc equipped with twin turbos and intercooler. It is based on the reliable KL-ZE engine(first introduced in the 626 in 1992). Special ECU and straight trough silencers, give the 626 MPS stunning performance. A claimed 280 hp(206Kw) at 6500 rpm and a max torque of 392 Nm at 4000 rpm, should make us seriously consider to give the old 323 GTX/GT-R up, and ask for more. <p>A 5 speed gearbox with 4wd configuration is used. The 4wd is a full time system.Handling is carried out by a 12-way adjustable suspension unit in each corner. The suspension also has height adjusting. The wheels are awesome, and brakes are too, sporting a state of the art setup with 6-pot calipers in front hugging on a 345 mm disc, and a 4-pot in the rear with a 315 mm disc. Styling is radical, with side skirts and arches that make the body "stand out from the crowd". The trunk lid has a large spoiler similar to the one on the Mitzu Evo (very nice!) This 4 door saloon is powerful, justifiable for families (all the comfort/convenient features of the standard 626) and small enough to be fun on the twisty stuff.<hr></blockquote><p>Engine
Type KL-ZE V6 DOHC 24V
Displacement cc 2,496
Max. Output EEC (kW/rpm) 206 / 6.500
Max. Torque EEC (Nm/rpm) 392 / 4.000
Transmission
5MT
Brakes
Front 6-piston, 345 mm disk plate
Rear 4-piston, 315 mm disk plate
Wheels
Tire 235/40 ZR18
Alloy rims 18x8J"<p>[ December 23, 2002: Message edited by: mx-3 Quebec ]</p>

[DVH]

<p>Not a big fan of the 4 doors, but still....nice

[quinn_seipp]

if they brought that to north america I woudl buy one in black and one in silver but all we get is the ****ty grocery getter, family car

[Custommx3]

Been posted several times before
but its a prototype, I wish it was in production, Id sure as hell have 1.

[Steeb]

they have a new one. mazda 6 mps. same setup but on the atenza body style. i posted few weeks back

[Hy300]

I want the tranny! AWD Full Time kicks *** !

[anjin1982]

now that would be nice whats the cost look like?

[Hy300]

Since I didn't get everything I asked for for Christmas, and I'm greedy, does anyone know how I can attain one of those AWD Transmissions. I'll just hang a stocking from my bumper and hope Santa can perform miracles, and lift 80lbs

[Guest]

if i ever had to get a family caar, its either gonna be one of those or an infiniti G35.

[mrmike420]

Can the mazda 6 engine be swapped into the mx-3?

[polak_gino]

that is whgen sexy car, its gonna make mazda a alot of money

[novadoc]

i want that manifold <p>what do you think the odds are that its gonna fit on a ze?<p>just noticed it has a straight neck
bummer<p>[ February 04, 2003: Message edited by: NoVa ]</p>