Page 1 of 2
MAF
Posted: June 26th, 2003, 12:06 pm
by Ericl
I was a morron and pulled my MAF out, i went to put it back in and the clips go on fine but i start my car and it doesnt idel and burns oil witch it never did. It sat in my drive way for the last week and today i decided to work on it i pulled it out again and on 2 of the 3 little prongs theres sider connecting them so i broke it no biggy nut then i pulled my intake off and i looked inside and there are too little metal peaces standing up on the inside is that prong suposted to be sidered onto it?? or is it just surounded by it?? how do i fix my car... do i need a whole new maf system or just the senser?? <p>and one more thing HOW IN THE HELL DOES THE DUMB SENSER COME OFF BY CLIPS <p>thanks for the help get back to me asap thanks tons
Re: MAF
Posted: June 26th, 2003, 12:08 pm
by Ericl
bah wrote this when i was pissed i mispelled idle wtf....
Re: MAF
Posted: June 26th, 2003, 1:07 pm
by Custommx3
You will need a new MAF, just an FYI they arent cheap.
Re: MAF
Posted: June 26th, 2003, 2:25 pm
by mazdasport
before you go buy a new one try resoldering that one... I did the same thing when I was putting on my intake and I re soldered it and sealed it back up and it works perfect. Its worth a try anyway...
Re: MAF
Posted: June 26th, 2003, 3:22 pm
by Ericl
well damnit... that sucks...
Re: MAF
Posted: June 26th, 2003, 3:50 pm
by OsoSlo z28
i have one...make an offer.
Re: MAF
Posted: June 26th, 2003, 5:50 pm
by tonguefreek
Re: MAF
Posted: June 26th, 2003, 6:51 pm
by Ericl
THANKS FOR THE LINK YOU JUST SAVED MY *** <p>i priced out new ones there like 500 bux so screw that ill just grab one off ebay thanks tons
Re: MAF
Posted: June 26th, 2003, 11:31 pm
by OsoSlo z28
i don't think the rx7 maf will fit the 94+ dohc wiring harness.
Re: MAF
Posted: June 26th, 2003, 11:50 pm
by mx3TT
The rx-7 has a VAF doesnt it? I was told to use a 2nd gen RX-7 VAF with my BPT. Do i have to do that or can I rig up the MAF from the mx-3. Sorry im braking away from the topic but while you guys are in the state of mind.
Re: MAF
Posted: June 27th, 2003, 2:17 am
by Ericl
i have a 94 sohc... ill get it and see if it fits...
Re: MAF
Posted: June 27th, 2003, 2:39 pm
by OsoSlo z28
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by Ericl:
i have a 94 sohc... ill get it and see if it fits...<hr></blockquote><p>how do you have a sohc if it's a 94? 94+ and a few 93's had the dohc.
Re: MAF
Posted: June 27th, 2003, 4:07 pm
by Ericl
ummm easy i have it..... i live in USA my friend owned a 93 sohc that he just crashed and got tottaled out before i could rip out his maf
Re: MAF
Posted: June 28th, 2003, 2:01 am
by cjthor
The single cam came from 92-93 in the usa
the dual cam came from 94 and up. They are different sensors.
Re: MAF
Posted: June 28th, 2003, 1:02 pm
by Ericl
all i know is that its single