Page 1 of 1
does any body know.....
Posted: March 31st, 2002, 1:27 pm
by MA12KOS
I just replaced my clutch and i need to know how many pounds do i have to put on the wheel hub when putting it back on. need the help asap!!!!!!!!!
Re: does any body know.....
Posted: March 31st, 2002, 1:38 pm
by johnny2300
Hey there I checked my manual on that topic you are looking at 20 lbs per bolt.<P>Got the information from a mazda manual my<BR>body gave me he works for a mazda dearlership any other questions letme know.
Re: does any body know.....
Posted: March 31st, 2002, 1:44 pm
by OsoSlo z28
tighten the wheel hub lock nut to 174-235 ft-lbs.
Re: does any body know.....
Posted: April 1st, 2002, 1:06 am
by MA12KOS
I put it at 180lbs thanks a lot for the help. adjustable cams are next. any advice on those?
Re: does any body know.....
Posted: April 1st, 2002, 1:19 am
by jaydog5678
what else do you have done to your car?
Re: does any body know.....
Posted: April 1st, 2002, 8:30 am
by OsoSlo z28
for the camshaft sprocket bolt, you want between 37-44 ft-lbs.
Re: does any body know.....
Posted: April 1st, 2002, 1:09 pm
by MA12KOS
i have the prm intake, stage 1 clutchmasters perf clutch, thats it i just started workin on the engine. outside i have a corksport kit with mr2 side vents. how else can i get pics up if i dont have a scanner or digi cam?
Re: does any body know.....
Posted: April 1st, 2002, 1:11 pm
by MA12KOS
ummm do guys have this grinding noise when u put it in reverse? I know i have to adjust the clutch cable but i dont know how to excatly. any ideas?