pm or message me a price
glridout@hotmail.com
WTB (in Canada) - Clutch Slave Cylinder (in good working
-
Redhouse
- Regular Member
- Posts: 72
- Joined: November 12th, 2001, 2:01 am
- Location: Victoria, BC Canada
WTB (in Canada) - Clutch Slave Cylinder (in good working
1996 Black GS 1.8l w. PRM intake and custom exhaust, zx2 strut conversion and Intrax springs, B&M short shifter and SRD bronzoil bushings, Ractive front and rear strut bars, Raxles axles, ESpec clear markers and front signals w. driving lights, Alpine headunit with 10" JL sub, jbl amp and front speakers.
Awaiting installation: Magnecore 8.5 Comp. ignition wires, ACT Stage 1 clutch w. SS clutch line, Outlaw phenolic spacers.
Awaiting installation: Magnecore 8.5 Comp. ignition wires, ACT Stage 1 clutch w. SS clutch line, Outlaw phenolic spacers.
Re: WTB (in Canada) - Clutch Slave Cylinder (in good working
Mine went last year and I bought a new one from Mazda. Still have a core. Mazda sells a rebuild kit if you want to attempt, you can have my core. This way you can play while your car is still on the road. I think the kit is $30 or so. Try NAPA as well, may be they have rebuild ones already.
-
LabradorBoy
- Regular Member
- Posts: 418
- Joined: September 5th, 2001, 2:01 am
- Location: Canada
Re: WTB (in Canada) - Clutch Slave Cylinder (in good working
Greg, I am also looking for a good used one...
A rebuild is fairly easy if you buy the kit from NAPA, but only attempt it if your slave cylinder is not corroded too bad. FYI NAPA has the rebuilt ones ready to buy for $45 USD's on their website, so we could count on about $70 CDN North of the border. They're good parts.
I have tried to find one here and will probably end up buying a rebuilt one from NAPA. If your core is in good general condition, go with the rebuild kit.
-Rob
A rebuild is fairly easy if you buy the kit from NAPA, but only attempt it if your slave cylinder is not corroded too bad. FYI NAPA has the rebuilt ones ready to buy for $45 USD's on their website, so we could count on about $70 CDN North of the border. They're good parts.
I have tried to find one here and will probably end up buying a rebuilt one from NAPA. If your core is in good general condition, go with the rebuild kit.
-Rob
Re: WTB (in Canada) - Clutch Slave Cylinder (in good working
I have One I will. Hows $35 sound u pay shipping?