parting out carbon fiber mx-3 w/ more parts *PICS*
-
- Senior Member
- Posts: 3338
- Joined: November 25th, 2001, 2:01 am
- Location: california
- Contact:
parting out carbon fiber mx-3 w/ more parts *PICS*
yes im parting out the car unfortunately. i'm currently saving up for an r32 skyline project car but here is a list of everything i have available..:
- nordskog digital a/f ratio gauge $15
- nordskog digital speedometer w/ sender $35
- boost gauge w/ mounting cup $15
- mazdaspeed green radiator cap $15
- OEM hood w/ shaved emblem $ 60 (pickup only)
- front/rear fenders (perfect condition) $65 each
- front/rear OEM bumper $45 each
- sparco steering wheel hub w/ 15mm spacer $65
- mazdaspeed black steering wheel w/ horn $135
- clear modified headlights $55
- all stock turnsignals (front DS signal modified for cold-air effect) $5 each
- amber hid fog lights $35
- audi 5000 fmic (6x17x3.5) $55
- rjs 5-pt. red racing harness $65 pair
- both black door panels $45
- DS and PS stock seats $25
- powertech muffler $65
- a/c compressor $65
- a/c condenser $25
- a/c heater core $25
- a/c lines $5
- a/c vents (all interior dash vents)$15
- black glovebox $10
- black sohc valve cover $10
- b&m transmission cooler $20
- carbon fiber front strut bar $85
- carbon fiber rear strut bar $135
- carbon fiber rear bumper $210
- carbon fiber roof $95
- carbon fiber doors (fiberglass frame, needs holes drilled to mount door panels) $500
- DS power window motors/regulators/PS switches (no DS switch) $55
i also have all stock sohc engine parts such as maf, fuel pump, radiator, distributor, cap, intake tube, airbox, etc.
<img src="http://boostedboogie.notanorg.org/photos/dash/parts.jpg" alt=" - " />
<img src="http://boostedboogie.notanorg.org/photo ... parts2.jpg" alt=" - " />
<img src="http://boostedboogie.notanorg.org/photo ... parts3.jpg" alt=" - " />
<img src="http://boostedboogie.notanorg.org/photo ... parts4.jpg" alt=" - " />
<img src="http://boostedboogie.notanorg.org/photo ... parts5.jpg" alt=" - " />
<img src="http://boostedboogie.notanorg.org/photo ... parts6.jpg" alt=" - " />
<img src="http://boostedboogie.notanorg.org/photo ... parts7.jpg" alt=" - " />
<small>[ August 22, 2004, 04:32 PM: Message edited by: marshmallow15 ]</small>
- nordskog digital a/f ratio gauge $15
- nordskog digital speedometer w/ sender $35
- boost gauge w/ mounting cup $15
- mazdaspeed green radiator cap $15
- OEM hood w/ shaved emblem $ 60 (pickup only)
- front/rear fenders (perfect condition) $65 each
- front/rear OEM bumper $45 each
- sparco steering wheel hub w/ 15mm spacer $65
- mazdaspeed black steering wheel w/ horn $135
- clear modified headlights $55
- all stock turnsignals (front DS signal modified for cold-air effect) $5 each
- amber hid fog lights $35
- audi 5000 fmic (6x17x3.5) $55
- rjs 5-pt. red racing harness $65 pair
- both black door panels $45
- DS and PS stock seats $25
- powertech muffler $65
- a/c compressor $65
- a/c condenser $25
- a/c heater core $25
- a/c lines $5
- a/c vents (all interior dash vents)$15
- black glovebox $10
- black sohc valve cover $10
- b&m transmission cooler $20
- carbon fiber front strut bar $85
- carbon fiber rear strut bar $135
- carbon fiber rear bumper $210
- carbon fiber roof $95
- carbon fiber doors (fiberglass frame, needs holes drilled to mount door panels) $500
- DS power window motors/regulators/PS switches (no DS switch) $55
i also have all stock sohc engine parts such as maf, fuel pump, radiator, distributor, cap, intake tube, airbox, etc.
<img src="http://boostedboogie.notanorg.org/photos/dash/parts.jpg" alt=" - " />
<img src="http://boostedboogie.notanorg.org/photo ... parts2.jpg" alt=" - " />
<img src="http://boostedboogie.notanorg.org/photo ... parts3.jpg" alt=" - " />
<img src="http://boostedboogie.notanorg.org/photo ... parts4.jpg" alt=" - " />
<img src="http://boostedboogie.notanorg.org/photo ... parts5.jpg" alt=" - " />
<img src="http://boostedboogie.notanorg.org/photo ... parts6.jpg" alt=" - " />
<img src="http://boostedboogie.notanorg.org/photo ... parts7.jpg" alt=" - " />
<small>[ August 22, 2004, 04:32 PM: Message edited by: marshmallow15 ]</small>
http://boostedboogie.notanorg.org
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
-
- Regular Member
- Posts: 369
- Joined: September 16th, 2002, 2:01 am
- Location: minnesota
Re: parting out carbon fiber mx-3 w/ more parts *PICS*
hey marsh interested in that steering wheel hub and steering wheel if they are compatible ,oh and your redded out tails as well email me a price of what your looking to get for these items
oh and btw an r32 with loads of cf all over it cuz im sure you'll be doing some crazy stuff with it
<small>[ August 05, 2004, 09:47 PM: Message edited by: koreanmx-er ]</small>
oh and btw an r32 with loads of cf all over it cuz im sure you'll be doing some crazy stuff with it
<small>[ August 05, 2004, 09:47 PM: Message edited by: koreanmx-er ]</small>
sold the mx-3 , bought 04 gtp comp g , from the smallest v6 to one of the biggest 3800 s/c FTW
-
- Senior Member
- Posts: 3338
- Joined: November 25th, 2001, 2:01 am
- Location: california
- Contact:
Re: parting out carbon fiber mx-3 w/ more parts *PICS*
actually the r32 will be very mild: dropped and a set of black wheels w/ red lip, carbon fiber hood, gt-r spoiler, aftermarket bumper/skirts/caps, stock interior except for steering wheel/shift knob/boot and racing seats, n1 muffler, hks intake, fmic, boost gauge, and a black paint job w/ the wonderwerks decal on the side doors.
http://boostedboogie.notanorg.org
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
-
- Regular Member
- Posts: 603
- Joined: August 2nd, 2001, 2:01 am
- Location: Brantford, Ontario, Canada
- Contact:
Re: parting out carbon fiber mx-3 w/ more parts *PICS*
boogie,
None of the images on your site are working, and we wanna see the stuff
http://boostedboogie.notanorg.org/sites/wonderwerks/products.htm
None of the images on your site are working, and we wanna see the stuff
http://boostedboogie.notanorg.org/sites/wonderwerks/products.htm
92 MX-3 GS 2.5 KLZE
14.385 @ 98.21
14.385 @ 98.21
-
- Regular Member
- Posts: 207
- Joined: February 29th, 2004, 2:01 am
- Location: calgary
Re: parting out carbon fiber mx-3 w/ more parts *PICS*
if he doesnt talk the hub i will, as long as their for our car
Re: parting out carbon fiber mx-3 w/ more parts *PICS*
hey budy i know what u got i think i want the hole inside of your car i know u did it all in black so the door pannels side back pannels back seet thats about it im me when u get a chance oh and i might want the c/f strut bars the valve cover and the head lights
<small>[ August 06, 2004, 04:13 AM: Message edited by: jdogsd1 ]</small>
<small>[ August 06, 2004, 04:13 AM: Message edited by: jdogsd1 ]</small>
Re: parting out carbon fiber mx-3 w/ more parts *PICS*
hey any pics for the oem cf hood?.. 200?.. did u make the hood ur self?.. or its from the packeifier canada compangy?... any pic?... or u can email me...thx
-
- Senior Member
- Posts: 3338
- Joined: November 25th, 2001, 2:01 am
- Location: california
- Contact:
Re: parting out carbon fiber mx-3 w/ more parts *PICS*
the hood was bought locally from another mxer that isn't a member of the boards.
jdog if you want i can sell you all the parts together for a cheaper price than with everything seperate.
jdog if you want i can sell you all the parts together for a cheaper price than with everything seperate.
http://boostedboogie.notanorg.org
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
- team slideways
92' mazda mx-3 (parting out), 03' bmw 325i, 03' bmw 530i (traded for 325), red FD3S (sold), 2005 cateyes carbon fiber bike
-
- Regular Member
- Posts: 736
- Joined: February 8th, 2002, 2:01 am
- Location: Toronto
Re: parting out carbon fiber mx-3 w/ more parts *PICS*
Are all skylines right hand drive? If so then it would be pretty dumb driving a right hand drive car in the U.S. Left hand turns would be like playing russian rullet with a gun.
"A hero and a coward both feel fear but it is the hero who reacts first while the coward hides behind the hero"
- Sam Baker
- Regular Member
- Posts: 1461
- Joined: May 23rd, 2003, 2:01 am
- Location: Wellington, New Zealand
Re: parting out carbon fiber mx-3 w/ more parts *PICS*
sorry to see ya go man..
but nice choice with the skyline i'm planning to get one later on.. RHD rules!! lol anywayz good luck with the sales
but nice choice with the skyline i'm planning to get one later on.. RHD rules!! lol anywayz good luck with the sales
92 Autozam AZ3
Re: parting out carbon fiber mx-3 w/ more parts *PICS*
I'll buy the transmission if it's a auto.
Let me know fast.
Let me know fast.
-
- Regular Member
- Posts: 554
- Joined: January 3rd, 2004, 2:01 am
- Location: Ottawa, Ontario
- Contact:
Re: parting out carbon fiber mx-3 w/ more parts *PICS*
Hey pics of the Steering wheel, hub, and bezel by chance? Is the bezel Made by you? What's the muffler like?
I wish I could take more, this is like a big kids candy shop! haha
Tyson
I wish I could take more, this is like a big kids candy shop! haha
Tyson
My Car Domain Page:
http://www.cardomain.com/memberpage/496099
Take a Look, leave a comment, and don't forget to vote.
http://www.cardomain.com/memberpage/496099
Take a Look, leave a comment, and don't forget to vote.
Re: parting out carbon fiber mx-3 w/ more parts *PICS*
i want the gauge bezel, and the dual pillar pod for definate i can send payment as soon as agreed.
i also want the hood if the price on shipping is good!
many thaks
i also want the hood if the price on shipping is good!
many thaks
check my car domain
http://www.cardomain.com/ride/2144443
http://www.cardomain.com/ride/2144443
Re: parting out carbon fiber mx-3 w/ more parts *PICS*
I`m interested in cf parts, as you know
nope-mx3
nope-mx3
:: 2001 Mazda Mx-5 Sport // 2013 Volvo V40 D2 Momentum ::
- JWMX3
- Senior Member
- Posts: 2060
- Joined: March 23rd, 2004, 2:01 am
- Location: Grassie, Ontario
- Contact:
Re: parting out carbon fiber mx-3 w/ more parts *PICS*
:pdriving a right hand drive car in the U.S. Left hand turns would be like playing russian rullet
94' Mx3 GS 0-60 in 7.53s [5 spd conversion / Rebuilt 2.5 KL]