Page 5 of 9
Re: mx-3_4evr 94 RS
Posted: March 10th, 2009, 10:35 pm
by mx-3_4evr
Limegreen mx-3 wrote:what tranny u end up going with it looks like the f-series but none of ur pic show me a good view so can tell what what series tranny it is..
if u go f- series u need the long passenger side axles that the 92-93 sohc mx-3 use..
what i used when i was all motor bp tec II setup on a f-series trans
never bothered to see what the whp was all i know that i made one pass 15.3@90 something 1/4 time.. long time ago all motor wasnt my cup of tea...
i think the rite setup and u seem have a good one and a good tune u can make more that u posted on ur poll...
good luck with ur N/A setup rev it to 8000rpms what i had my rev limit to with my old n/a setup...
then again im for from being a conservative mazda guy. LOL
It's the F-series tranny. I'm using a BP automatic half shaft since it's the same spline count as the F-series.I will try to beat that 1/4 mile time for sure. I will be revving up to 7300 RPMs though because after that the OEM springs start to float.
Re: mx-3_4evr 94 RS
Posted: March 10th, 2009, 11:00 pm
by Limegreen mx-3
just to let u know all my bp's were all stock internals, 7300 is just to conservative for me.. have fun and i know u will be able to beat my time with ease....
Re: mx-3_4evr 94 RS
Posted: March 10th, 2009, 11:22 pm
by mx-3_4evr
Limegreen mx-3 wrote:just to let u know all my bp's were all stock internals, 7300 is just to conservative for me.. have fun and i know u will be able to beat my time with ease....
lol Thanks! Another thing is that I did the exintake mod and with that I wont make any power after 7000 I think. We will see in the dyno results
Re: mx-3_4evr 94 RS
Posted: March 14th, 2009, 6:01 am
by mx-3_4evr
Updatezz!!!!
Exhaust manifold wrapped in heat wrap
and finished headlight....
Re: mx-3_4evr 94 RS
Posted: March 28th, 2009, 5:51 am
by mx-3_4evr
Updatez! lol
Re: mx-3_4evr 94 RS
Posted: March 28th, 2009, 8:58 am
by Ukrman
that is BEAUTIFUL...
very nice. did you do it yourself or have someone do it for you. I think you should make me a set of seat covers like that
Re: mx-3_4evr 94 RS
Posted: April 9th, 2009, 9:48 am
by mx-3_4evr
It runs! After 2 cranks, it started! Here is a video
http://www.youtube.com/watch?v=VrCQ_LL75Wk" onclick="window.open(this.href);return false;
Re: mx-3_4evr 94 RS
Posted: April 9th, 2009, 1:40 pm
by Mooneggs
wow that is a gorgeous interior
I'm guessing the headliner and b pillars are suede as well? any more pics of the backseat, etc?
Re: mx-3_4evr 94 RS
Posted: April 10th, 2009, 6:18 am
by hotsiit
Mooneggs wrote:wow that is a gorgeous interior
+1, totally agree!
I want to hear this thing once you can rev it up more
Nice work, more videos!
Re: mx-3_4evr 94 RS
Posted: April 13th, 2009, 7:59 pm
by mx-3_4evr
Re: mx-3_4evr 94 RS
Posted: April 13th, 2009, 9:24 pm
by Nd4SpdSe
Quick Q...with ITB's...how do you use an airflow sensor?
Re: mx-3_4evr 94 RS
Posted: April 14th, 2009, 3:14 am
by mx-3_4evr
I'm using Megasquirt and that uses a MAP sensor
Re: mx-3_4evr 94 RS
Posted: April 14th, 2009, 12:53 pm
by Nd4SpdSe
so you don't need to use the GM IAT sensor?
Re: mx-3_4evr 94 RS
Posted: April 14th, 2009, 1:27 pm
by mx-3_4evr
I am using it, it sits next to the air filters
Re: mx-3_4evr 94 RS
Posted: April 14th, 2009, 2:08 pm
by Mooneggs
wow... this car just moved up in my ranks of favorite mx-3's.... is that the OEM JDM MX-3 steering wheel?!?!
