Page 4 of 4
Re: Dead MX-3
Posted: June 29th, 2004, 11:21 am
by IanL
Originally posted by Mariusz:
Correct, there is a a small box connected to the body of the distributor and on the other end trough a thin cable to the A 3pin. There is no short trough it, but also the resistance of it is inifinity. What capacity should it have ?
Sorry, I don't have that information, but if the resistance is infinity, it sounds good.
Re: Dead MX-3
Posted: June 29th, 2004, 12:20 pm
by mmx01
Tomorow i will put my MX-3 to the workshop, i don't have any idea whats wrong. And it still don't want to start.
Re: Dead MX-3
Posted: July 2nd, 2004, 8:17 am
by mmx01
My MX-3 is back on the wheels
Thanks to the new ignition module.
Re: Dead MX-3
Posted: July 2nd, 2004, 9:06 am
by IanL
Originally posted by Mariusz:
My MX-3 is back on the wheels Thanks to the new ignition module.
Good news! Now why was it ok when it was tested in the lab - didn't they test the coil with the module?
Re: Dead MX-3
Posted: July 3rd, 2004, 9:53 am
by mmx01
Probably not. But why they told me that the ICM is OK I don't know. That was the reason of my troubles because I had information that module is OK.