Projectors (patrick and Jaydogs Design)
- PATDIESEL
- Senior Member
- Posts: 4476
- Joined: August 13th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Atlanta, GA.
Ahhh, the Yay sayers pipe in; thanks guys for your support. I'm truely sorry that the price isn't less. I really really am, but Mnumonic is pretty close in his estimate of time and money.
The group buy will start soon, I know that the senoir members have heard about this allready so how about approval for a group buy?
10 will be the magic number and that will be all i'm willing to start with and probably all that will be sold. I also hear that a few senoir members want a price cut and I'll consider that too since you are truely the ones who have kept the MX-3 alive through your site.
The group buy will start soon, I know that the senoir members have heard about this allready so how about approval for a group buy?
10 will be the magic number and that will be all i'm willing to start with and probably all that will be sold. I also hear that a few senoir members want a price cut and I'll consider that too since you are truely the ones who have kept the MX-3 alive through your site.
ZE -strait neck,headers,2.5 exhaust,pheno spacers,lower cross member,GC coils,MS struts,Brembo slotted rotors,filled MS mounts,SS brake/clutch lines, CAI,to rear bat reloc,Hella headlamps,Hella DE fogs 180WHP
- jaydog5678
- Regular Member
- Posts: 1043
- Joined: March 27th, 2002, 2:01 am
- Location: Marietta, GA,
- Contact:
Trust me. You have never seen lighting quite like this in an Mx-3. Everything is visible thanks to the Hella's. It's a night and day improvement to say the least.
It was a funny thing to see when aiming the high beam lights. 25 ft away from the back of a building that had to be atleast 50ft high and very, very long; the beams from the projectors had an enormous ring cast on the wall. It was huge but most of the light, was of course, concentrated directly in front.
The low beams had a line across the wall that spanned at least 40 to 50ft. Just incredible lighting output IMO. Try that with a Civic projector...I don't think so.
It was a funny thing to see when aiming the high beam lights. 25 ft away from the back of a building that had to be atleast 50ft high and very, very long; the beams from the projectors had an enormous ring cast on the wall. It was huge but most of the light, was of course, concentrated directly in front.
The low beams had a line across the wall that spanned at least 40 to 50ft. Just incredible lighting output IMO. Try that with a Civic projector...I don't think so.
- atlantamx3
- Supporting Member
- Posts: 2888
- Joined: June 2nd, 2001, 2:01 am
- Location: Kennesaw, Ga, USA
- Contact:
- jschrauwen
- Forum Moderator
- Posts: 6052
- Joined: September 27th, 2003, 2:01 am
- Location: Frankford, Ontario, Canada
- Contact:
Put me in coach.....LOL. Will send money ahead of time....just on spec.PATDIESEL wrote:Ahhh, the Yay sayers pipe in; thanks guys for your support. I'm truely sorry that the price isn't less. I really really am, but Mnumonic is pretty close in his estimate of time and money.
The group buy will start soon, I know that the senoir members have heard about this allready so how about approval for a group buy?
10 will be the magic number and that will be all i'm willing to start with and probably all that will be sold. I also hear that a few senoir members want a price cut and I'll consider that too since you are truely the ones who have kept the MX-3 alive through your site.
'92 GS-ZE - sold, '95 GS - sold, '02 Protege LX - Daughter, '00 Audi A4 2.8 QTip, Ducati TT2
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
- PATDIESEL
- Senior Member
- Posts: 4476
- Joined: August 13th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Atlanta, GA.
Perry please I've allready e-mailed Jeff.. i know how this works, this post is to guage interest only the actual group buy will happen soon, but not in this thread.
ZE -strait neck,headers,2.5 exhaust,pheno spacers,lower cross member,GC coils,MS struts,Brembo slotted rotors,filled MS mounts,SS brake/clutch lines, CAI,to rear bat reloc,Hella headlamps,Hella DE fogs 180WHP
- atlantamx3
- Supporting Member
- Posts: 2888
- Joined: June 2nd, 2001, 2:01 am
- Location: Kennesaw, Ga, USA
- Contact:
- Kokiriwave
- Regular Member
- Posts: 365
- Joined: February 20th, 2004, 2:01 am
- Location: Washington
- Contact:
when will this group buy start?
and how much for the builders kit?
and how much for the builders kit?
I want MAZDASPEED!
MY WEBSITE:: http://kingmx.net
MY WEBSITE:: http://kingmx.net
-
- Senior Member
- Posts: 2165
- Joined: December 7th, 2002, 2:01 am
- Location: windsor, ontario
- Contact:
i'm interested but i have to find out how much it will cost to get them put in cause i'd rather trust the install to a pro for something important like this so i gotta see if i can really afford it.
ProjectMx
My BP and AWD build thread
Cardomain
93 Mx-3 GS with bp and GTR AWD system
93 Escort GT daily driving
My BP and AWD build thread
Cardomain
93 Mx-3 GS with bp and GTR AWD system
93 Escort GT daily driving
- Sam Baker
- Regular Member
- Posts: 1461
- Joined: May 23rd, 2003, 2:01 am
- Location: Wellington, New Zealand
dude pat.. thats so badass
we've been waiting FOREVER for somethin even close to that! and when i saw the pix i was like WOW thats crazy dude.. if i wasnt already building my own, i'd totally buy your kit. it doesnt look all that hard to install really! and the price is right on! if it ends up that you may need 1 or 2 more people to finish the GB, count me in. but for now im just gonna watch and drool
good job man!!
we've been waiting FOREVER for somethin even close to that! and when i saw the pix i was like WOW thats crazy dude.. if i wasnt already building my own, i'd totally buy your kit. it doesnt look all that hard to install really! and the price is right on! if it ends up that you may need 1 or 2 more people to finish the GB, count me in. but for now im just gonna watch and drool
good job man!!
92 Autozam AZ3
- jschrauwen
- Forum Moderator
- Posts: 6052
- Joined: September 27th, 2003, 2:01 am
- Location: Frankford, Ontario, Canada
- Contact:
Hey, get back and finish your own, so you can sell them to me...he he he..LOLSam Baker wrote:dude pat.. thats so badass
we've been waiting FOREVER for somethin even close to that! and when i saw the pix i was like WOW thats crazy dude.. if i wasnt already building my own, i'd totally buy your kit. it doesnt look all that hard to install really! and the price is right on! if it ends up that you may need 1 or 2 more people to finish the GB, count me in. but for now im just gonna watch and drool
good job man!!
PS Sam, need to see some newer pics to update your projector project. They call it, Corporate Espionage Muah hah hah hah
'92 GS-ZE - sold, '95 GS - sold, '02 Protege LX - Daughter, '00 Audi A4 2.8 QTip, Ducati TT2
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas