MX-3.com

The mold for the wiper cowl is actually too involved in order to get the mounting points proper. Probably the last thing on my list.

Really?

One thing I've already really wanted is CF fenders.

alright then,

-Any interior part really maintly the glove box, center consul thing (thing thats around the climate control, know what i mean? and from there back...), the outer lip thing around the dash, vents, mirror holder.... the list could go on but thats it for me...

-triangluar peice holding the side mirrors

-gass door lid

-some kind of low profile spoiler

-sun roof peice

-door handles (interior and exterior)

-seamless lip

-wiper blades

-custom made cup holder in the center consul! i hade having to use a towel as a cup holder...

i think thats it....

i forgot one

Slimline CF visors

im down for just about everything that has been suggested

So for a carbon fibre hatch, its going to cost about $600 + shipping.

In order to make it, we woould need a minimum of 10 commited to the buy and 1 donor car. The donor would receive compensation for the time it takes us to tool the mold together.

Gas door lid is already available as is the CF rad support. I can have those ready on a moments notice.

I will work hard to get the hatch into production, but we will need at least 10 guys+ donor car.

Fenders are also a big possibility but so far onlty one person interested; we wuld need at least 10 for any part to go into production that isnt already tooled.

I forgot to add that the front GS continuous lip in CF is also another personal favourite but again 10 guys minimum + 1 donor car/lip

+1 for a seamless lip. I'd be more than willing to send over my lip as a donor in order to see this done.

EZ_4_FUN wrote:So for a carbon fibre hatch, its going to cost about $600 + shipping.

In order to make it, we woould need a minimum of 10 commited to the buy and 1 donor car. The donor would receive compensation for the time it takes us to tool the mold together.

Gas door lid is already available as is the CF rad support. I can have those ready on a moments notice.

I will work hard to get the hatch into production, but we will need at least 10 guys+ donor car.

Fenders are also a big possibility but so far onlty one person interested; we wuld need at least 10 for any part to go into production that isnt already tooled.

I may be able to provide the doner car...just need to make arrangements for something else to give me transportation whilst it be in use...

EZ_4_FUN wrote:So for a carbon fibre hatch, its going to cost about $600 + shipping.

In order to make it, we woould need a minimum of 10 commited to the buy and 1 donor car. The donor would receive compensation for the time it takes us to tool the mold together.

Just curious, you talking about the hatch wrapped in CF or a hatch made completely in Carbon Fiber?

Im talking about a hatch made from Carbon Fiber, not wrapped.

Similar to the hood you have. Underside is fiberglass with glossy black finish, top side of course in CF.

All mounting points are already built in, its just a matter of replacing the glass and bolting up.

I am pretty sure we are talking about a whole new hatch.

Just an idea. How about CF mini side skirts (Cork/MS)

MS sides are also available in CF. They have been so for years now...

$250 or so I'd say for the pair plus shipping...

I had no idea. That is awsome. Any chance you have a pic of them installed?

No pics as no one has requested them in CF.

Its just a matter of laying it up in the mold using CF and not FG... Easy as pie.