CARBON FIBRE PRODUCTS
CARBON FIBRE PRODUCTS
Some of you know me and what I'm capable of. I'm curious to see what most of you want done in CF.
A simple sentence will do
eg: Carbon fibre add-on lip to oem bumper
I'm actually working on a top-secret project for the mx-3. I have something to show now, but id rather wait until its further developed... Barry might have an idea... SHHH
A simple sentence will do
eg: Carbon fibre add-on lip to oem bumper
I'm actually working on a top-secret project for the mx-3. I have something to show now, but id rather wait until its further developed... Barry might have an idea... SHHH
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
- RS_OBD'oh_2
- Senior Member
- Posts: 2400
- Joined: April 9th, 2007, 1:26 pm
- Location: Calgary, AB
Re: CARBON FIBRE PRODUCTS
rear diffuser. Nothing tooo crazy and big tho.
Re: CARBON FIBRE PRODUCTS
Rear diffuser as in rear spoiler?
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
- RS_OBD'oh_2
- Senior Member
- Posts: 2400
- Joined: April 9th, 2007, 1:26 pm
- Location: Calgary, AB
Re: CARBON FIBRE PRODUCTS
kinda
Looking for something similar to this... nothing too fancy or bulky.
http://cgi.ebay.ca/Mitsubishi-Lancer-EV ... dZViewItem" onclick="window.open(this.href);return false;
Looking for something similar to this... nothing too fancy or bulky.
http://cgi.ebay.ca/Mitsubishi-Lancer-EV ... dZViewItem" onclick="window.open(this.href);return false;
Re: CARBON FIBRE PRODUCTS
kinda? Kinda? How do you get kinda? does that look like a spoiler?
Bringing Love and Unity to all Mx3ers one engine at a time
- RS_OBD'oh_2
- Senior Member
- Posts: 2400
- Joined: April 9th, 2007, 1:26 pm
- Location: Calgary, AB
Re: CARBON FIBRE PRODUCTS
kinda like a rear under spoiler.
Re: CARBON FIBRE PRODUCTS
lol that made me laughEGR wrote:kinda? Kinda? How do you get kinda? does that look like a spoiler?
RE: CF products
few random ideas not sure if they have been mass produced or what not.
-CF guage bezel
-CF center console (i am working on rewiring my window switches to below the e brake, cF would be cool)
-CF rad support group buy, I imagine more people will jump on this if its brought forth)
-CF lip is a great idea!
Thats all off the top of my head
- RS_OBD'oh_2
- Senior Member
- Posts: 2400
- Joined: April 9th, 2007, 1:26 pm
- Location: Calgary, AB
Re: CARBON FIBRE PRODUCTS
Seems like you were thinking about looks, not function.EGR wrote:kinda? Kinda? How do you get kinda? does that look like a spoiler?
Damn EGR.
- fowljesse
- Supporting Member
- Posts: 5676
- Joined: March 17th, 2006, 2:59 pm
- Location: portland, OR
- Contact:
Re: CARBON FIBRE PRODUCTS
Anyone else interested in a CF headliner?
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
- hotsiit
- Supporting Member
- Posts: 1078
- Joined: March 4th, 2001, 2:01 am
- Location: Allentown, PA
- Contact:
Re: CARBON FIBRE PRODUCTS
The side mirror interior backing plates (The triangle pieces that cover where the driver and passenger side mirrors bolt on, if that makes sense).
I will keep thinking...
I will keep thinking...
Chris--It's HOTNESS, you wouldn't understand! -- Donate to MX-3.com--It'll make you feel good!
http://www.cardomain.com/id/colonelsmx3
1993 Mazda MX-3 RS-Turbo
1993 Mazda RX-7 touring
1983 Mazda RX-7 GSL
1995 Subaru Impreza L AWD Sedan
1987 Jeep Comanche
http://www.cardomain.com/id/colonelsmx3
1993 Mazda MX-3 RS-Turbo
1993 Mazda RX-7 touring
1983 Mazda RX-7 GSL
1995 Subaru Impreza L AWD Sedan
1987 Jeep Comanche
Re: CARBON FIBRE PRODUCTS
These are all good ideas. the CF Rad support was already done. This is a matter of piece work.
how many guys want a full CF rad support. We had perfected the layup and its not shoddy like the first batch.
id say 10 guys; $140 each + shipping. That's for full carbon fiber tip to tip. i was retailing these if im not mistaken for $160 + shipping and only CF on the interior. i hope thats clear.
i also have the gas cap in CF. you would replace your stock door but keep the mounting bracket portion. I can't even remember what I sold these for?/?
I like the hatch Idea, but we would need like 20 guys to offset the cost of just the mold on each part to make it reasonable. $600 + shipping is my guestimate and that would be for FG underside w/ glossy finish and all the mounting hardware already embedded, just like a CF hood would come.
how many guys want a full CF rad support. We had perfected the layup and its not shoddy like the first batch.
id say 10 guys; $140 each + shipping. That's for full carbon fiber tip to tip. i was retailing these if im not mistaken for $160 + shipping and only CF on the interior. i hope thats clear.
i also have the gas cap in CF. you would replace your stock door but keep the mounting bracket portion. I can't even remember what I sold these for?/?
I like the hatch Idea, but we would need like 20 guys to offset the cost of just the mold on each part to make it reasonable. $600 + shipping is my guestimate and that would be for FG underside w/ glossy finish and all the mounting hardware already embedded, just like a CF hood would come.
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
- Mooneggs
- Forum Moderator
- Posts: 6128
- Joined: August 10th, 2005, 10:08 pm
- antispam: ~SPAM*SUX~
- Location: Hillsboro, OR
- Contact:
Re: CARBON FIBRE PRODUCTS
I like alot of the suggestions above... and they would go nicely with my other CF items
CF rear hatch
CF Lip
CF interior mirror backs triangle pieces
CF Headliner
CF rad support
CF rear hatch
CF Lip
CF interior mirror backs triangle pieces
CF Headliner
CF rad support
My Feedback
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs
Re: CARBON FIBRE PRODUCTS
Seamless (totally smooth) cf gs lip
Canadian GS wing
CF hatch
CF mazdaspeed bumper
Canadian GS wing
CF hatch
CF mazdaspeed bumper
Bringing Love and Unity to all Mx3ers one engine at a time
Re: CARBON FIBRE PRODUCTS
I've got the MS bumper available to be done in CF as we speak but we will need to do at least 10 piece run for it to be worth the effort.
As we speak, there are only a couple of ppl interested in any one ite, not enough to justify the R&D behind tooling a mold... I remain optimistic.
As we speak, there are only a couple of ppl interested in any one ite, not enough to justify the R&D behind tooling a mold... I remain optimistic.
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.
http://www.pakfeifertuning.com
- Nd4SpdSe
- Senior Member
- Posts: 11212
- Joined: May 25th, 2002, 2:01 am
- Location: Québec City, Quebec, Canada
- Contact:
Re: CARBON FIBRE PRODUCTS
Wiper Cowl
I'd love a CF MS Bumper, but I race, and the last thing I'd want to do it damage that :S
I'd love a CF MS Bumper, but I race, and the last thing I'd want to do it damage that :S
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project