Page 2 of 2

Posted: October 18th, 2005, 12:37 am
by Mnemonic
you can use the same fuel pump it works fine, dont know about the gaskets for the injectors but im pritty sure they all work for the k series.

Posted: October 18th, 2005, 8:52 am
by lakersfan1
Mnemonic wrote:
hgallegos915 wrote:cant you use klde injectors? i think those would work. Leaking injectors IS DANGEROUS..if your wires begin to arc if WILL catch fire...i can tell you from experience..
he could use klde injectors but they will lean out his car, as the kfze injectors are the same as the klze injectors.
And how are KLZE and KLDE injectors different since they're both blue tops?

As for gaskets for the injectors, they're just O-rings. You can try and have the parts store find the same size O-ring in a catalog, or you can just apply a THIN coat of RTV sealant to the O-ring and slap it in. Usually the O-rings jsut get hard over time, but a little RTV will create a small flexible barrier to allow it to seal again.

Posted: October 18th, 2005, 9:46 am
by Custommx3
KLZE, KLDE, and KFZE all use blue top injectors, and I believe they are all the same. The next step up would be a Millenia S injector.

Posted: October 18th, 2005, 10:39 am
by ocshaman
Do i need the grommets on the VC gasket? Guess I won't know until I take the cover off huh?

Posted: October 18th, 2005, 8:46 pm
by ocshaman
what plugs are you guys running, and what would be the stock temp range?