Junk Yard MX-3 (updated with prices listed)

RodbeyBur · Post by **RodbeyBur** » March 17th, 2005, 4:16 pm

OK I called the Junk yard and got some prices:

jschrauwen seats: $25 each Not sure about leather I will check and give you a price if they have em...

nope-mx3 engine mounts: $10 each Do you care if the middle is cracked what am I looking for quality wise? Wouldn't it just be better to buy new inserts? I should be able to get to these fairly easy so if you want em you got em...take some pics it may help me.. I am guessing you want mainly the metal peices so you can get ne inserts. Let me know.

ninjajim4 center console lid: $20 I'll make sure no cracks and in good shape

lakersfan1 Throttle Cable: $10 from where to where (pedal to TB)??? one or two? GS I am guessing..

mazda78 Glove Box: $10 Plastic Trim: $10 I will make sure not broken or cracked and give everthing I remove in box

skylineracing07 Computer: $35 Wheres it located? Send me a pic please so I get the right part!!.... Stock 4 banger ecu right??

nos92mx3 Front Lip: $25 Not sure if they have black...do you want any other color? I did see a black car...a white car..both GS. I check for cracks...but not sure about clips / retainers...does this just bolt on?

soccer8888 Throttle Body: $25 Rear Wiper Plastic trim: $10

phillymx3mayn Brake Release Switch: $20 Please send pic..

Monstarmx3 Moon Roof: DO you want the OEM electrical style or aftermarket.... I think one has the electrical...does color matter? Moonroof assembly w/ bolts only?

hgallegos915: LMAO...I don't want to remove the engine and tranny for a clutch fork....

Kenzie: That seems like a lot of work...don't want to remove a dash and ship it to you....sorry.

Most of these parts are low priced and some are electrical. I will look at them and make sure no signs of mechanical failure or cracks, but will NOT be responsible for bad parts. These are junkyard cars I am pulling them from. Please remember that.

If you still want these parts...let me know. I will start pulling some tomorrow before work. It may take me till next week to get through them all so have patience.

If I missed anyone let me know.

Remember, I am giving up my own time and am not making anything off the price. You are responsible for paying shipping and hopefully give me some finders fees.

soccer8888 · Post by **soccer8888** » March 17th, 2005, 5:19 pm

Not to be a hassle, but what color is the trim piece over the motor?

And I'll take both of them, assuming the TB isn't all rusted out and the trim piece isn't broken.

fictionaldaydream · Post by **fictionaldaydream** » March 17th, 2005, 7:47 pm

I need the power window switch 94, I need The left air vent cover by the windshield, I also need a middle console. The arm rest thing. Do you have any of those.

projectmx · Post by **projectmx** » March 18th, 2005, 8:42 am

sweet thanks... let me know where to send the money and when.. also please make sure it is a 94/95 cause twice now i've ended up with pieces from a 92/93 and they won't fit. thanks again

nope-mx3 · Post by **nope-mx3** » March 18th, 2005, 9:22 am

I`ll give you $15 + shipping for each mounts.
$60 + shipping total.
Hope this works for you

I`m gonna fill them with urethane (got some 94A waiting).

nope-mx3

nos92mx3 · Post by **nos92mx3** » March 18th, 2005, 12:15 pm

black preferable on the lip but if not ill take whats there, if there is a black one with a crack as long as it isnt bad ill take it. as far as clips and retainers if they are there and arent a pain in the a-- to get off ill take them if not its no biggie.

RodbeyBur · Post by **RodbeyBur** » March 18th, 2005, 2:23 pm

Ok I went down today and pulled some things before work this morning and took some pictures of the cars.

I will load the pictures tonight if I have time. I am drving to Mass tonight to pick up a 99 Cougar, so I may not have time before I leave.

Here is what I found out.... 1 93 4cyl green , 2 93 GS white black, and one 94 GS red...

Lakersfan...
I got a 93 glove box for you....I pulled all the screws and latches...I will box up and get ready to ship on monday..indside is dirty and needs cleaned...in great shape other than that.

I also have a 93 radio trim...no cracks..I mistakenly thought someone needed this. but realize they wanted a 94. Chime in if you want it.

THERE ARE NO DOUBLE DECK LIDS FOR CENTER CONSOLE ON ANY CAR
seems these are a hot item...I'm glad my car has one in good shape.

THERE ARE NO LEATHER SEATS IN ANY CAR
Ill keep looking and let you know if some turn up.

There is a black GS lip. The car is sitting on ground (no tires) and the lip is tweaked a little...just a little. It has some scratches and the screwholes are broke but still functional (see pictures). Seems to be ok otherwise. It can be mounted without problems I think. These come in two pieces ...left and right... let me know if you want it.

Monday I will try and pull these items:
Motor Mounts (gonna get greasy before work)
94 glove box, trim, vents, switches
Black GS Lip

ninjajim4 · Post by **ninjajim4** » March 18th, 2005, 2:32 pm

Thanks, RodbeyBur!!

Please make sure its the double deck lid w/cupholders when you pick it up.

also, if they've got any mats that are in great shape (i could even do with just the front two), or could look good with just a cleaning, please scoop em up for me as well.

and feel free to pad the price some extra for yourself for your trouble, or you can expect me to do so for you

2fazed · Post by **2fazed** » March 18th, 2005, 2:41 pm

93 green 4cl, mean teal? I could use both front fenders. Really need the passenger. Only if there in great shape. There about 6 screws holding them on from all sides. Really easy to get off. Let me know.

RodbeyBur · Post by **RodbeyBur** » March 18th, 2005, 2:56 pm

They told me 50 per fender..plus shipping... Kinda expensive if you ask me. Can almost get a set of aftermarkets for that. Just my 2.

I'll get you some pictures next week.

Moonstar:
The moonroof is $35 I know the black car has a stock one. WHat color do you need?

soccer8888 · Post by **soccer8888** » March 18th, 2005, 3:08 pm

hey, i actually just sold the car.... so i won't need the TB or wiper motor trim. i appreciate your efforts though, sorry about this

nos92mx3 · Post by **nos92mx3** » March 18th, 2005, 3:54 pm

yea ill take the lip, if you could hold it/ hide it for me until i get paid. (new job)

RodbeyBur · Post by **RodbeyBur** » March 18th, 2005, 4:13 pm

nos92mx3 wrote:yea ill take the lip, if you could hold it/ hide it for me until i get paid. (new job)

LMAO...ok I'll hide it for you...

ncmx3 · Post by **ncmx3** » March 18th, 2005, 5:57 pm

I need the front motor mount that is located under the engine on the crossmember.

nos92mx3 · Post by **nos92mx3** » March 18th, 2005, 9:18 pm

ok man thanks ill be talking to you probably next friday, i hate how they hold your first weeks pay.....

MX-3.com

Junk Yard MX-3 (updated with prices listed)

TB and Trim

I need