Junk Yard MX-3 (updated with prices listed)
Junk Yard MX-3 (updated with prices listed)
If anyone is searching for some hard to find parts I have a pick and pull yard that has several MX-3's in it. Even has a mx6 in it too. If anyone need any thing that is hard to find or usually broken I will be gald to take it off for you and send it. They all seem to be in OK shape. I might even be able to get some pics using my camera hpone.
You pay for parts and shipping of course.
Nothing major though, I don't have alot of free time and don't want to be spending time at the yard.
You pay for parts and shipping of course.
Nothing major though, I don't have alot of free time and don't want to be spending time at the yard.
Last edited by RodbeyBur on March 17th, 2005, 4:19 pm, edited 1 time in total.
- jschrauwen
- Forum Moderator
- Posts: 6052
- Joined: September 27th, 2003, 2:01 am
- Location: Frankford, Ontario, Canada
- Contact:
YES PLEASE!!!
Leather seats+ from 93' GS SE...........Ya I know, I'm really reachin' here, but these are desparate times.....yadda...yadda...yadda.
Bugs, DavidOS - stay away!!!! you didn't see this thread, you don't know it's here, you have completely given up on leather seats.........as I continue to swing my magical watch back and forth.......back and forth......LOL
Leather seats+ from 93' GS SE...........Ya I know, I'm really reachin' here, but these are desparate times.....yadda...yadda...yadda.
Bugs, DavidOS - stay away!!!! you didn't see this thread, you don't know it's here, you have completely given up on leather seats.........as I continue to swing my magical watch back and forth.......back and forth......LOL
'92 GS-ZE - sold, '95 GS - sold, '02 Protege LX - Daughter, '00 Audi A4 2.8 QTip, Ducati TT2
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
-
- Senior Member
- Posts: 3825
- Joined: June 26th, 2003, 2:01 am
- Location: Puyallup, WA
-
- Senior Member
- Posts: 2165
- Joined: December 7th, 2002, 2:01 am
- Location: windsor, ontario
- Contact:
if there is a 94 or 95 i need the glove box and the trim around the radio (just unscrew the screw behind the ash tray and it should pop off)
ProjectMx
My BP and AWD build thread
Cardomain
93 Mx-3 GS with bp and GTR AWD system
93 Escort GT daily driving
My BP and AWD build thread
Cardomain
93 Mx-3 GS with bp and GTR AWD system
93 Escort GT daily driving
-
- Regular Member
- Posts: 194
- Joined: February 16th, 2005, 3:23 pm
- Location: north dakota
-
- Senior Member
- Posts: 3825
- Joined: June 26th, 2003, 2:01 am
- Location: Puyallup, WA
Hey. Yeah. Almost forgot. I need just the mounting hardware for the glove box for a 92-93 MX-3. So any screws, clips, and latches nececssary to hold the glove box on. I've only got the plastic glove box itself. So not only the bottom, but also whatever's on top (the latch plus whatever crews and stuff).mazda78 wrote:if there is a 94 or 95 i need the glove box
-
- Junior Member
- Posts: 10
- Joined: February 20th, 2005, 11:14 am
TB
If you have a GS throttle body in there, that'd be nice to get, also the plasic trim cover for the rear wiper motor?
-
- Regular Member
- Posts: 194
- Joined: January 22nd, 2005, 11:38 am
- Location: Philly
- Contact:
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
well i need clutch fork and anything that goes there except bearing..
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
- monstar-mx-3
- Regular Member
- Posts: 1112
- Joined: February 28th, 2002, 2:01 am
- Location: vancouver