Re: 1.6 Mx-3 Header
Posted: November 30th, 2009, 7:24 pm
We have them in stock. You can swing by our store and pick one up.Mx3Kid16 wrote:so did we have to pre order these to get them or can i pick one up?
-Derrick
-Derrick
Page 8 of 8
-Derrick
Re: 1.6 Mx-3 Header
Posted: November 30th, 2009, 8:16 pm
Is that the clearance for both motors b6me and b6de ? I will still get it 
Re: 1.6 Mx-3 Header
Posted: December 2nd, 2009, 12:33 pm
It is for the SOHC. The Mx3 we did the DOHC development work on did not have A/C. The mounting location on the blocks for the A/C bracket is the same for both engines.jkbreazeale wrote:Is that the clearance for both motors b6me and b6de ? I will still get it
-Derrick
Re: 1.6 Mx-3 Header
Posted: December 4th, 2009, 4:35 am
i received 6 headers for guys from France and Belgium 
we'll have to work on cars now !
we'll have to work on cars now !
Re: 1.6 Mx-3 Header
Posted: December 7th, 2009, 12:48 pm
tell me how it feels.
Re: 1.6 Mx-3 Header
Posted: January 27th, 2010, 9:17 am
Anybody got it on yet!?
Re: 1.6 Mx-3 Header
Posted: February 12th, 2010, 9:04 pm
We have sold quite a few of these headers. I am surprised there hasnt been someone posting up impressions about them.
-Derrick
-Derrick
Re: 1.6 Mx-3 Header
Posted: February 15th, 2010, 9:30 am
me too... this sucks i wanna knoww
Re: 1.6 Mx-3 Header
Posted: February 20th, 2010, 12:50 pm
A few of these headers have gone to Mercury Capri customers. Maybe check one of their forums?
Derrick
Derrick
Re: 1.6 Mx-3 Header
Posted: May 12th, 2010, 5:34 pm
the 6 headers i bought for french and belgian guys are not yet fitted ... it seems 24hours a day aren't enough ...
personally catalyst is a problem for me, i can't ride if my car is not fitted with it, so i have to weld it on a part.
personally catalyst is a problem for me, i can't ride if my car is not fitted with it, so i have to weld it on a part.
Re: 1.6 Mx-3 Header
Posted: May 18th, 2010, 12:09 pm
anyone could tell me whether the O2 sensor and the EGR could be eliminated somehow? this CS header rocks though! would love to use my 1.6 SOHC custom header with my 1.6 DOHC with a slight modding but the O2 and EGR was out of my radar. I know bungs could be easily welded on the downpipes but eliminating O2 sensors would be the best solution imho. prob my rough idle would disappear as well...
thanks for the intel in advance!
cheers, f
thanks for the intel in advance!
cheers, f
Re: 1.6 Mx-3 Header
Posted: June 2nd, 2010, 6:32 pm
That is a tough one. The car looks for the O2 sensor to make adjustments to the way is fuels the engine.freongee wrote:anyone could tell me whether the O2 sensor and the EGR could be eliminated somehow? this CS header rocks though! would love to use my 1.6 SOHC custom header with my 1.6 DOHC with a slight modding but the O2 and EGR was out of my radar. I know bungs could be easily welded on the downpipes but eliminating O2 sensors would be the best solution imho. prob my rough idle would disappear as well...
thanks for the intel in advance!
cheers, f
-Derrick