replacing headlight BULB
replacing headlight BULB
Hi guys,<p>My passenger side headlight is out - I'm hoping its the bulb, rather than the relay/switch/wiring. It works fine on "bright" but on regular - no dice.<p>Anyone know if this is a complicated repair or is that page of the shop manual online?<p>Roberto
Speed Kills - Drive a honda, live forever...
-
- Regular Member
- Posts: 78
- Joined: June 16th, 2002, 2:01 am
- Location: Nova Scotia
- Contact:
Re: replacing headlight BULB
Could be the buld...do you have xenon bulbs in your car by any chance? If so and you have the 100/80 watt bulbs there is a possibility of some burnage. In my old precidia i burnt the hotwire (middle wire) on both sockets which caused only my brights to work. All i did was drill out the middle of the socket and connect the wire directly to the bulb and problem solved. has been fine for a year now i believe.
Re: replacing headlight BULB
I've got whatever comes stock - I didn't do any of that fancy danshy hyper white stuff.
Speed Kills - Drive a honda, live forever...
-
- Regular Member
- Posts: 270
- Joined: September 18th, 2002, 2:01 am
- Location: rochester, new york
- Contact:
Re: replacing headlight BULB
pop ur hood and take out the bulb and got to the local store and get anter one
mosricer is powerd by mx-3's,gen2 mr2's and of course SUBARU'S.
Live Life One Ride At A Time.
Live Life One Ride At A Time.
-
- Regular Member
- Posts: 78
- Joined: June 16th, 2002, 2:01 am
- Location: Nova Scotia
- Contact:
Re: replacing headlight BULB
I would say it is probably just a bulb