i cant fint the screw to lower my idle

whinypunk · Post by **whinypunk** » December 30th, 2002, 1:07 pm

i know its by the throttle body, but can someone give me a better description. my car idles to high.

Post by **Custommx3** » December 30th, 2002, 1:17 pm

I believe its on the round part your throttle cable connects to. Its raining so Im not gonna go check

MX3chicago · Post by **MX3chicago** » January 7th, 2003, 1:11 pm

where the LINKAGE meets the little ROUND thing on ur throttle body and there is this little shock looking thingy when u press the gas pedal the circle thingy moves to open the flap for air to come in now with ur fingers open it all the way on the BOTTOM of it there is a SMALL screw with 2 nuts adjust it that way ( ,) ,<is the screw

anjin1982 · Post by **anjin1982** » January 7th, 2003, 3:12 pm

um aint the screw on top of the throttle body the only screw(flathead)?!

OsoSlo z28 · Post by **OsoSlo z28** » January 7th, 2003, 10:14 pm

it's on the top of the TB. it's inset. it usually has a plastic/rubber cap on top of it.

ProtegeSTS · Post by **ProtegeSTS** » January 8th, 2003, 12:27 am

OsoSlo z28 · Post by **OsoSlo z28** » January 8th, 2003, 9:28 pm

thank you o'great one of wonderful resources

:p

MX-3.com

i cant fint the screw to lower my idle

i cant fint the screw to lower my idle

Re: i cant fint the screw to lower my idle

Re: i cant fint the screw to lower my idle

Re: i cant fint the screw to lower my idle

Re: i cant fint the screw to lower my idle

Re: i cant fint the screw to lower my idle

Re: i cant fint the screw to lower my idle