backup light on

4-Cyl. Technical/Performance Discussions
Post Reply
Jesse
Regular Member
Posts: 105
Joined: May 11th, 2001, 2:01 am
Location: Belmont,MA,USA

backup light on

Post by Jesse »

Does anyone know where I can disengage the reverse light? For some reason, it is always on. I can't even find out how to take out the bulbs for the reverse lights.
mxcess
Regular Member
Posts: 126
Joined: May 21st, 2001, 2:01 am
Location: Whitney,Tx. USA

Re: backup light on

Post by mxcess »

Is the tranny auto or stick?
Jesse
Regular Member
Posts: 105
Joined: May 11th, 2001, 2:01 am
Location: Belmont,MA,USA

Re: backup light on

Post by Jesse »

tranny is stick
mxcess
Regular Member
Posts: 126
Joined: May 21st, 2001, 2:01 am
Location: Whitney,Tx. USA

Re: backup light on

Post by mxcess »

The back-up switch is located on the transaxle casing. Look on the front drivers side of the tranny and you should see the switch with two wires coming out of it. I imagine you will just have to replace the switch itself. It might be in the online manual if you can't find it. Good luck.<BR>P.S. sorry couldn't be more help, but my Chilton's doesn't go into too much detail.
Jesse
Regular Member
Posts: 105
Joined: May 11th, 2001, 2:01 am
Location: Belmont,MA,USA

Re: backup light on

Post by Jesse »

thanks for the help, some help is better than none when I started. I'll look for the switch.
Post Reply

Return to “4-Cyl. Technical/Performance”