(GI) BP-T TURBO KIT

[pox]

Only (GI) because I don't have current pictures. Looking to sell off my current turbo goodies. This should be an all in one bolt on set-up. All you will need to do is fit the downpipe to your current exhaust set up and tap your oil pan for the drain. Also, intercooler piping may need to be shortened to fit anything aside from an MX-3. All items are still installed in my MX-3. All items have 0 miles from myself. I had the vehicle running at one point and there was no smoke or issues with any items. Knockoff BOV may leak during normal operation, I dont know, never got the car on the road. The RX-7 VAF was opened and tinkered with, the always on gas wire was tapped. Flapper resistance should be measured and adjusted for your personal use.

Items included:

BP26 TURBO
BP26 EXHAUST MANIFOLD
BP26 ECU
TURBO OIL AND COOLANT LINES
FMIC KIT WITH PIPES (FIT TO MX-3)
KNOCKOFF GREDDY BOV
STAINLESS STEEL 2.5 INCH DOWN PIPE (ELIMINATES A/C)
MX-6 TURBO 330CC INJECTORS (CLEANED AND FLOW TESTED)
RX-7 B-CODE VAF (WILL NEED ADJUSTING)

**** LOOKING TO GET $1200 PLUS SHIPPING. ****

[pox]

Bump.

[pox]

Some older pictures.

[pox]

Bumpin this post yo.