F/S: 92 MX-3 GS

Do you have an MX-3 related item for sale? Post a quick note here.
Post Reply
ProjekMX3
Supporting Member
Posts: 244
Joined: December 2nd, 2002, 2:01 am
Location: Kalamazoo, MI
Contact:

F/S: 92 MX-3 GS

Post by ProjekMX3 »

Here's the story on this mx-3. Two weeks ago I was driving on the highway and my engine seized so long story short. So, the engine needs to be rebuilt or swapped out. The car has about 109K miles on it. I'm posting to test interest to see if I can get enough out of selling this car so I can buy another mx3 I found. Everything else in the car works perfectly. The car is blaze red with a black interior. The paint job is decent could use a touch up. Also the same day the engine seized I got in a fender bender so the car needs a new passenger side front fender. I just replaced the distributor cap and rotor about two weeks ago. Also what the odometer states is incorrect. When installing aftermarket gauges like many others I broke my temp gauge and the tach started sticking. So instead of attempting to replace the individual gauge and the other things that weren't working I just put in a cluster. If the response is enough I am willing to part it out. I would prefer to sell it as a whole. n3street@wmich.edu or AIM:Projekmx3
92 GS, 210 psi per cylinder KL-101 Engine, Pacesetter Exhaust, Centerforce DF, CAI, Hi Flow Cat, Headers.
By Spring 06: Megasquirt and FPR
By Fall 06: KL-31 Heads with Interprep Cams
Tempus
Regular Member
Posts: 273
Joined: May 20th, 2002, 2:01 am
Location: Maltby Washington

Re: F/S: 92 MX-3 GS

Post by Tempus »

How much would you have to spend to get the other mx-3 you're looking at?

personally I'd be comparing that to the cost to swap in a 2.5l engine.. it's as easy as replacing the existing 1.8l but you get a massive boost in performance. (if budget is tight, go for the KL-DE motor as it's easier to get cheaply)
{sigh} Time to move on
Out with the old: Tropical Emerald MX-3 GSR (KL-DE)
In with the new: Phantom Blue Mazda3s GT
ProjekMX3
Supporting Member
Posts: 244
Joined: December 2nd, 2002, 2:01 am
Location: Kalamazoo, MI
Contact:

Re: F/S: 92 MX-3 GS

Post by ProjekMX3 »

It was my original plan to swap out the seized k8 and put in a ze. But the seller of this other car approached me and his car already has a ze it just needs a little work. I decided it was a better deal to do that than buy a ze for this current car. The car also has a really good sound system infinity 6.5's in the back and rockford fosgate 6.5's in the front. At this point the exhaust is just axle back to a flowmaster. When the engine was running it was a one of a kind sound. Only one like it in my town. Anyway its a fantastic car and I'm sad to see it go but I really want a ZE.
92 GS, 210 psi per cylinder KL-101 Engine, Pacesetter Exhaust, Centerforce DF, CAI, Hi Flow Cat, Headers.
By Spring 06: Megasquirt and FPR
By Fall 06: KL-31 Heads with Interprep Cams
Bouncer
Junior Member
Posts: 11
Joined: July 23rd, 2004, 2:01 am
Location: Colorado

Re: F/S: 92 MX-3 GS

Post by Bouncer »

Hey how much for your timing belt tensioner
Split Sixer
Regular Member
Posts: 99
Joined: March 17th, 2004, 2:01 am
Location: Ontario Canada

Re: F/S: 92 MX-3 GS

Post by Split Sixer »

where do u live and how much do u want for it??
Splixer
ProjekMX3
Supporting Member
Posts: 244
Joined: December 2nd, 2002, 2:01 am
Location: Kalamazoo, MI
Contact:

Re: F/S: 92 MX-3 GS

Post by ProjekMX3 »

I live in Kalamazoo Michigan 49009. I am asking 1300 obo for the car. The price is a little negotiable because I need enough money to buy the cars replacement. And make a few minor repairs on the new car. Here are some pictures of the car. It is currently being stored at my apartment complex, so I do not have a shopvac or a way of washing it available so the pictures do not truly do it justice. I will be trying to clean it this week however.
<img src="http://memimage.cardomain.com/member_im ... 1_full.jpg" alt=" - " />
<img src="http://memimage.cardomain.com/member_im ... 8_full.jpg" alt=" - " />
<img src="http://memimage.cardomain.com/member_im ... 9_full.jpg" alt=" - " />
<img src="http://memimage.cardomain.com/member_im ... 0_full.jpg" alt=" - " />
<img src="http://memimage.cardomain.com/member_im ... 1_full.jpg" alt=" - " />
<img src="http://memimage.cardomain.com/member_im ... 2_full.jpg" alt=" - " />
<img src="http://memimage.cardomain.com/member_im ... 3_full.jpg" alt=" - " />
<img src="http://memimage.cardomain.com/member_im ... 4_full.jpg" alt=" - " />
92 GS, 210 psi per cylinder KL-101 Engine, Pacesetter Exhaust, Centerforce DF, CAI, Hi Flow Cat, Headers.
By Spring 06: Megasquirt and FPR
By Fall 06: KL-31 Heads with Interprep Cams
ProjekMX3
Supporting Member
Posts: 244
Joined: December 2nd, 2002, 2:01 am
Location: Kalamazoo, MI
Contact:

Re: F/S: 92 MX-3 GS

Post by ProjekMX3 »

<img src="http://memimage.cardomain.com/member_im ... 5_full.jpg" alt=" - " />
[img]ttp://memimage.cardomain.com/member_img_a/310705_66_full.jpg[/img]
<img src="http://memimage.cardomain.com/member_im ... 7_full.jpg" alt=" - " />
<img src="http://memimage.cardomain.com/member_im ... 8_full.jpg" alt=" - " />
<img src="http://memimage.cardomain.com/member_im ... 9_full.jpg" alt=" - " />
<img src="http://memimage.cardomain.com/member_im ... 0_full.jpg" alt=" - " />
92 GS, 210 psi per cylinder KL-101 Engine, Pacesetter Exhaust, Centerforce DF, CAI, Hi Flow Cat, Headers.
By Spring 06: Megasquirt and FPR
By Fall 06: KL-31 Heads with Interprep Cams
Split Sixer
Regular Member
Posts: 99
Joined: March 17th, 2004, 2:01 am
Location: Ontario Canada

Re: F/S: 92 MX-3 GS

Post by Split Sixer »

aww i was hoping u were closer =/
Splixer
ProjekMX3
Supporting Member
Posts: 244
Joined: December 2nd, 2002, 2:01 am
Location: Kalamazoo, MI
Contact:

Re: F/S: 92 MX-3 GS

Post by ProjekMX3 »

Someone out there has got to need a project car. I'm sure some of you have a relative that always wanted a mx3 to drop a ZE in. Anyway I need to sell this car soon because I need to send the engine in the replacement car back to the company before the warranty expires. I am now asking 1100 US obo. n3street@wmich.edu or AIM: Projekmx3
92 GS, 210 psi per cylinder KL-101 Engine, Pacesetter Exhaust, Centerforce DF, CAI, Hi Flow Cat, Headers.
By Spring 06: Megasquirt and FPR
By Fall 06: KL-31 Heads with Interprep Cams
plusinfinit
Regular Member
Posts: 111
Joined: September 11th, 2002, 2:01 am
Location: cleveland

Re: F/S: 92 MX-3 GS

Post by plusinfinit »

Hei if u don't get to sell the whole car id buy the front bumper. I live in cleveland ohio so shiping will not be too much. If U think about seling it let me know.\
plusinfinit@yahoo.com
StPapp
ProjekMX3
Supporting Member
Posts: 244
Joined: December 2nd, 2002, 2:01 am
Location: Kalamazoo, MI
Contact:

Re: F/S: 92 MX-3 GS

Post by ProjekMX3 »

I decided to post the car on ebay here is a link if anyone is interested. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2487050211
92 GS, 210 psi per cylinder KL-101 Engine, Pacesetter Exhaust, Centerforce DF, CAI, Hi Flow Cat, Headers.
By Spring 06: Megasquirt and FPR
By Fall 06: KL-31 Heads with Interprep Cams
ProjekMX3
Supporting Member
Posts: 244
Joined: December 2nd, 2002, 2:01 am
Location: Kalamazoo, MI
Contact:

Re: F/S: 92 MX-3 GS

Post by ProjekMX3 »

The car is up for sale again after having a non-paying bidder on ebay. Looking to get this car out of my parking lot as soon as possible so I can start work on my project car. I am asking 1100 obo for this car. If you have any questions feel free to email me at n3street@wmich.edu or AIM: projekmx3 .
92 GS, 210 psi per cylinder KL-101 Engine, Pacesetter Exhaust, Centerforce DF, CAI, Hi Flow Cat, Headers.
By Spring 06: Megasquirt and FPR
By Fall 06: KL-31 Heads with Interprep Cams
Post Reply

Return to “MX-3 Related Items For Sale/Trade”