WhiteFinish's Log there we go again
- DeadMaker
- Regular Member
- Posts: 457
- Joined: January 29th, 2010, 12:33 pm
- antispam: No
- Location: Greece
Re: WhiteFinish's Log Powder coated subframes + Bushings
Any update on this beast?
Black Mazda Mx3 Rs 1997 B6DE
- WhiteFinish
- Regular Member
- Posts: 1635
- Joined: April 3rd, 2006, 9:48 am
- Location: Netherlands
- Contact:
Re: WhiteFinish's Log
Many things happend again.
HLA's of my KLDE engine were completly stuck, so a small overhaulage.
Measuring crankshaft
Perfect in spec.
Also cleaned and measured all bolts of the bottom-end.
Crank is in.... slow proces of building the engine.
In the meanwhile picked up my car after a fresh engine bay paint.
And... a very happy person with my PRESSO floormats
HLA's of my KLDE engine were completly stuck, so a small overhaulage.
Measuring crankshaft
Perfect in spec.
Also cleaned and measured all bolts of the bottom-end.
Crank is in.... slow proces of building the engine.
In the meanwhile picked up my car after a fresh engine bay paint.
And... a very happy person with my PRESSO floormats
- Josh
- Supporting Member
- Posts: 3432
- Joined: April 18th, 2002, 2:01 am
- Location: Washington state
- Contact:
Re: WhiteFinish's Log Powder coated subframes + Bushings
Very nice! and those mats look great
Josh
95' AWD MX-3 RST - (work log - http://www.mx-3.com/phpBB3/viewtopic.php?f=46&t=73765 )
94' GS - KLZE DD (work log - viewtopic.php?uid=2713&f=46&t=79063&start=0 )
05' MS RX-8 - Parted out and Sold :'(
Feedback - http://www.mx-3.com/phpBB3/viewtopic.php?f=37&t=49519
Cardomain Page - http://www.cardomain.com/ride/408020
Face Book page http://www.facebook.com/pages/Mazda-MX- ... 3472959216
95' AWD MX-3 RST - (work log - http://www.mx-3.com/phpBB3/viewtopic.php?f=46&t=73765 )
94' GS - KLZE DD (work log - viewtopic.php?uid=2713&f=46&t=79063&start=0 )
05' MS RX-8 - Parted out and Sold :'(
Feedback - http://www.mx-3.com/phpBB3/viewtopic.php?f=37&t=49519
Cardomain Page - http://www.cardomain.com/ride/408020
Face Book page http://www.facebook.com/pages/Mazda-MX- ... 3472959216
- WhiteFinish
- Regular Member
- Posts: 1635
- Joined: April 3rd, 2006, 9:48 am
- Location: Netherlands
- Contact:
Re: WhiteFinish's Log Powder coated subframes + Bushings
- WhiteFinish
- Regular Member
- Posts: 1635
- Joined: April 3rd, 2006, 9:48 am
- Location: Netherlands
- Contact:
- marcdh
- Regular Member
- Posts: 1460
- Joined: July 26th, 2006, 3:54 pm
- Location: Belfast -Northern Ireland
- Contact:
Re: WhiteFinish's Log Powder coated subframes + Bushings
What a beaut! That's some brilliant work put in. Hope it runs beautifully!
AZ-3 1498cc Turbo! EVO 8 turbo and manifold, 5 stud swap, SSR Type C, DIYPNP seq Megasquirt
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
- WhiteFinish
- Regular Member
- Posts: 1635
- Joined: April 3rd, 2006, 9:48 am
- Location: Netherlands
- Contact:
Re: WhiteFinish's Log Powder coated subframes + Bushings
Working on some more wiring.
Will take more interieur pics lateron.
Every aftermarket electronics hooked up in the car will be properly fused and all the wires nicely tucked in 'snakeskin'.
**damn what a work **
-- at the same time documenting how it is hooked up.
Also the connectors to the amps and wiring will be redone; order has been placed to get the necessary things in.
My KLZE heads have been port matched for intake / exhaust so that build can also slowely start.
Trying to find a brake disk in a 4 hole pattern in 300mm+ size for my mazdaspeed 6 calipers.
And.. Dont believe I posted on this, the 3rd brakelight with a big thanks to Mooneggs.
Will take more interieur pics lateron.
Every aftermarket electronics hooked up in the car will be properly fused and all the wires nicely tucked in 'snakeskin'.
**damn what a work **
-- at the same time documenting how it is hooked up.
Also the connectors to the amps and wiring will be redone; order has been placed to get the necessary things in.
My KLZE heads have been port matched for intake / exhaust so that build can also slowely start.
Trying to find a brake disk in a 4 hole pattern in 300mm+ size for my mazdaspeed 6 calipers.
And.. Dont believe I posted on this, the 3rd brakelight with a big thanks to Mooneggs.
Re: WhiteFinish's Log Powder coated subframes + Bushings
This was an excellent read. I love coming over here from the Probe community and seeing the same amount of passion for the cars! *Group Hug* lol
- WhiteFinish
- Regular Member
- Posts: 1635
- Joined: April 3rd, 2006, 9:48 am
- Location: Netherlands
- Contact:
Re: WhiteFinish's Log Wires
-
- Regular Member
- Posts: 155
- Joined: August 7th, 2010, 11:03 am
- antispam: ~SPAM*SUX~
- Josh
- Supporting Member
- Posts: 3432
- Joined: April 18th, 2002, 2:01 am
- Location: Washington state
- Contact:
Re: WhiteFinish's Log It's all about the wires.
Love it, very nice.
Josh
95' AWD MX-3 RST - (work log - http://www.mx-3.com/phpBB3/viewtopic.php?f=46&t=73765 )
94' GS - KLZE DD (work log - viewtopic.php?uid=2713&f=46&t=79063&start=0 )
05' MS RX-8 - Parted out and Sold :'(
Feedback - http://www.mx-3.com/phpBB3/viewtopic.php?f=37&t=49519
Cardomain Page - http://www.cardomain.com/ride/408020
Face Book page http://www.facebook.com/pages/Mazda-MX- ... 3472959216
95' AWD MX-3 RST - (work log - http://www.mx-3.com/phpBB3/viewtopic.php?f=46&t=73765 )
94' GS - KLZE DD (work log - viewtopic.php?uid=2713&f=46&t=79063&start=0 )
05' MS RX-8 - Parted out and Sold :'(
Feedback - http://www.mx-3.com/phpBB3/viewtopic.php?f=37&t=49519
Cardomain Page - http://www.cardomain.com/ride/408020
Face Book page http://www.facebook.com/pages/Mazda-MX- ... 3472959216
Re: WhiteFinish's Log It's all about the wires.
Want some more of it.
- WhiteFinish
- Regular Member
- Posts: 1635
- Joined: April 3rd, 2006, 9:48 am
- Location: Netherlands
- Contact:
- icajewler
- Regular Member
- Posts: 119
- Joined: December 29th, 2013, 10:16 am
- antispam: ~SPAM*SUX~
- Location: N.C.
Re: WhiteFinish's Log It's all about the wires.
Just lookin at some work and wonderin when you can do my mx3 I can't wait to have to time and money to work on mine like this!
93 MX3 SE (klze conversion in progress)
03 Elantra GLS (DD)
92 MX3 GS sold missed!
The very air around me seemed to catch fire and freeze at the same time, that's how I knew he had enough for today.
Rangers Lead The Way!
03 Elantra GLS (DD)
92 MX3 GS sold missed!
The very air around me seemed to catch fire and freeze at the same time, that's how I knew he had enough for today.
Rangers Lead The Way!
- Evo_Spec
- Senior Member
- Posts: 2504
- Joined: December 30th, 2008, 3:41 am
- Location: Calgary, Alberta, Canada
Re: WhiteFinish's Log It's all about the wires.
haven't been back here for a while to find this, nice work man.
that twister cat thing looks awesome.
that twister cat thing looks awesome.